If Three of Global Link Baggage Lock Set are Ordered Are they All Keyed Alike

Question

Question:

I would like to order three of these. Will they all be key alike? I would hate to have three different keys.

asked by: Jose A

0

Expert Reply:

Yes, if you were to order three of the Global Link Baggage Lock Set part # GL34FR they would all show up using with the same key which is G391.

expert reply by: Jameson C

0

Answer 1

Yes. You can install the Global Link RV Baggage Door Slam Latch with Keyed Alike Option - Black - 1-1/2" Thick #295-000015 on the bagge door of your 2015 Keystone Montana High Country 343RL since it will work on baggage doors up to 1-1/2"…

view full answer...

Answer 2

The internal hardware of the Global Link RV Baggage Door Slam Latch #295-000015 is approximately 1-1/2" in length so your door would need to match that size to allow the outer latch pieces to sit flush against the door. That being said you can…

view full answer...

Answer 3

We may have some potential options for replacing the tack room door lock on your Featherlight trailer. Is the 5" L x 5" H dimension you gave for the door cutout or the lock itself? The best way to find the right replacement lock is to go by…

view full answer...

Answer 4

I think I have a solution for you in the Global Link RV Entry Door Locking Latch Kit, #295-000021 for white or, #295-000019 for black. This latch kit measures 3.47" wide x 4.28" tall, fits doors that are 1-1/4" to 1-1/2" thick,…

view full answer...

Answer 5

I contacted Trimark in regards to a replacement part for the Trimark 030-0900. 030-0900 is actually a series number not a specific part number. To find the part number you will need to take the interior handle completely off the unit. On the back…

view full answer...

Answer 6

I checked your account with us and the only key I was able to find that matches what you're describing is the Replacement Keys for Lippert Slam Latch Baggage Door Handle #LC230012 which aren't going to have any markings as it's a…

view full answer...

Answer 7

Hey Cory! Yes, the Global Link RV Baggage Door Slam Latch #295-000015 will fit with a 1-1/4" thick door. If you don't have a mounting plate then you'll also need the part #295-000016 to complete the installation.

view full answer...

Answer 8

Generally speaking, the hub face measurements will be around 15" longer than the spring center measurement. That said, this can vary based on multiple different factors such as tire size, offset, etc. The most common options we offer are the…

view full answer...

Answer 9

The Bauer Products RV Baggage Door Slam Latch #BA57FR will fit cut outs that measure 3-1/4" tall x 4" wide (which is a fairly standard measurement). If that is the size of your cut out then this slam latch will work for you. While the Bauer…

view full answer...

Answer 10

The Replacement Mounting Hardware part #LC701665 comes with the Extension Rods, Extension Rod Bracket, Torsion Arm Caps, and various hardware. I am not sure what all you have now but it sounds like you might also need the torsion heads, part #LC87FR…

view full answer...

Answer 11

As long as the track the original rollers ride on is wide enough to accommodate the 1-1/16 inch width of the roller assembly, the 3 roller #37220565 hanger would work great for you.

view full answer...

Answer 12

From the images you attached, it appears you have what is typically used as a baggage/storage door latch. Because our entry door latches are designed for common RV door thickness of greater than 1", I suggest the Global Link Locking Baggage Lock…

view full answer...

If Three of Global Link Baggage Lock Set are Ordered Are they All Keyed Alike

Product Page this Question was Asked From

Continue Researching