Will Global Link RV Baggage Door Slam Latch Fit a 1-1/4" Thick Door

Question

Question:

Will this work on a door of 1.25 inch thickness.

asked by: Cory

0

Expert Reply:

Hey Cory!

Yes, the Global Link RV Baggage Door Slam Latch # 295-000015 will fit with a 1-1/4" thick door. If you don't have a mounting plate then you'll also need the part # 295-000016 to complete the installation.

expert reply by: Jon G

0

Bolt Hole Spacing for Global Link RV Baggage Door Slam Latch
(click to enlarge)

Cory

4/3/2024

Could I also get 1 RV NORMAL DOOR LOCK be keyed to match the baggage keys? if so which RV lock and how to I make sure same keys.

Reply

Jon G.

4/3/2024

@Cory Yes, if you use the drop down on the product page to select "Keyed Alike" when you add the latch to your shopping cart you can get this and any Global Link Entry Door Kit, like part # 295-000019, with the keyed alike option sent to you with the same key number. Let me know if you need help choosing an entry door latch kit and I'd be more than happy to help you find the correct replacement!

Reply

Cory

4/3/2024

I have the factory mounting plates that came on my trailer will those work or do I need those specific mounting plate?

Reply

Jon G.

4/3/2024

@Cory You can use your existing mounting plates as long as the bolt holes are spaced 2-3/4" x 2-11/16" apart on center (see attached photo above).

Reply

Answer 1

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

view full answer...

Answer 4

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 5

The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

You're right, the mounting bracket is unique (in a good way) for the Curt TriFlex NEXT Trailer Brake Controller #C24VV. The bracket is smaller and all you do is put the included adhesive tape on the bracket and stick it wherever you like under…

view full answer...

Answer 8

To install the Tekonsha Prodigy P3 Trailer Brake Controller #90195 in your Freightliner S2RV chassis the wiring is behind the kick panel in the drivers compartment. There is not a connector on the wires, they are simply terminated with tape. You will…

view full answer...

Answer 9

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 10

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 11

It's very easy to install a trailer brake controller on a 2021 Honda Ridgeline. I recommend the Tekonsha Prodigy P3 Trailer Brake Controller part #90195 which comes with a harness that you could simply attach to the one that came with the…

view full answer...

Answer 12

Hey Donald, the best Blue Ox weight distribution would be the pat #BXW0550 as it has a perfect tongue weight range for your 450 lb tongue weight trailer.

view full answer...

Will Global Link RV Baggage Door Slam Latch Fit a 1-1/4" Thick Door

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching