Can HitchMate StabiLoad Support for Cargo Stabilizer Bars Fit Over End of 2x4

Question

Question:

Would this fit over a 2x4? I use two 2x4s bolted together on top of each other like making it a 2x8 as a bed divider.

asked by: Mud

1

Helpful Expert Reply:

Yes, the HitchMate StabiLoad Support for Cargo Stabilizer Bars # HE4017 would fit over the end of a 2x4.

expert reply by: Jameson C

1

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 4

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 5

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 6

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 7

Hey Eric, the Curt Multi-Fit Ball Kit w/ 4" Offset for Chevy/Ford/GMC/Nissan Underbed Gooseneck Hitch #C68ZV is not going to work with your Ram, unfortunately. This one is only going to work for select YMM (Year Make Model) Ford 250-450s, GMC…

view full answer...

Answer 8

The design of the Hitch Gooseneck Trailer Hitch #GY73XR doesn't really allow for much in the way of security. The only thing you can really do is replace the safety pin that secures the T-handle with a lock. This would prevent anyone from lifting…

view full answer...

Answer 9

The Gen-Y Hitch Gooseneck Trailer Hitch for GM OEM Puck Systems #GY73XR will not impact the ride quality even though it has a 5" offset. It will be the same as using a standard gooseneck ball since the weight is carried at the same location in…

view full answer...

Answer 10

While there isn't a custom fit option, there may be a universal towing mirror for your 2022 Jeep Grand Wagoneer. I say "may" because you have to measure your mirror to see how large it is for a fit. If your mirror measures 4-1/2"…

view full answer...

Answer 11

I reached out to the manufacturer, who told me the HitchMate Cargo Stabilizer Bar and StabiLoad Support - Full-Size Pickups - 59" to 73" Long #HE4016-4017 was made in China. I have added a couple video reviews below for you to check out as…

view full answer...

Answer 12

There are no steps specifically made for a tractor, but there may be an option for you. The Carr Mega Step Fold-Up Truck Step #CARR190001B can work if you have a 12" long x 5-3/4" tall space for the mounting plate. I have added a link to a…

view full answer...

Can HitchMate StabiLoad Support for Cargo Stabilizer Bars Fit Over End of 2x4

Product Page this Question was Asked From

Continue Researching