Where is HitchMate Cargo Stabilizer Bar and StabiLoad Support HE4016-4017 Made

Question

Question:

Where is this bar made?

asked by: Johnny N

0

Expert Reply:

I reached out to the manufacturer, who told me the HitchMate Cargo Stabilizer Bar and StabiLoad Support - Full-Size Pickups - 59" to 73" Long # HE4016-4017 was made in China.

I have added a couple video reviews below for you to check out as well of the HitchMate Cargo Stabilizer Bar and StabiLoad Support # HE4016-4017.

expert reply by: Kyle S

0

Answer 1

I'd measure again to be sure of what you have. Most standard truck bed widths are right at 72 inches which the #HE4016-4017 would fit and work well with but if you are at 73 inches this probably won't get as snug as you'd like. Instead we…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

I checked the manual and also reached out to Blue Ox to confirm this but found no notes and Blue Ox stated that the Blue Ox Base Plate Kit #BX1739 would be a compatible fit for your 2020 GMC Sierra 3500 (diesel). If you haven't picked out the…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 11

We do indeed have air suspension for your 2024 GMC Sierra 3500HD crew cab truck. You'll want to go with the Firestone Ride-Rite Air Helper Springs (Rear Axle) #F2613. There is also an AirLift branded option, but I personally would stick with…

view full answer...

Answer 12

If you have the Lippert Ground Control 3.0 then your middle jack is either the 17" Tall #LC342610 or the 19" Tall #LC305339. I'm not sure where you would be able to find a part number but if you check out the attached photo you can take…

view full answer...

Where is HitchMate Cargo Stabilizer Bar and StabiLoad Support HE4016-4017 Made

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching