Valve Stem Extender Fitment For A 2023 Ram 4500  

When it comes to valve extenders for your 2021 Ram 3500 I recommend The Wheel Masters 4-Hose Inflation Kit - 16" to 19-1/2" Dually - Hub Mount #WM8001. These stainless-steel-wrapped hoses take the hassle out of inflating and checking the…

For the Wheel Masters 4-Hose Inflation Kit - 16" to 19-1/2" Dually - Hub Mount - 135-Degree Bend #WM8001-135, the inner hose is 13 inches straight and the outside hose is 9-1/2 inches. I've attached a photo to help.

For your 2014 Ford F-250/350 Super Duty you will want to use Wheel Masters 4-Hose Inflation Kit part #WM8001. The bend on the Wheel Masters 4-Hose Inflation Kit part #WM8001-135 causes the hoses to be in contact with your rim as soon as it comes off…

The etrailer Electric Trailer Brakes #AKEBRK-6 will likely fit your 5,200 lb AL-KO axle. These are 12" x 2" with a 5 bolt brake flange mounting pattern. I recommend checking your brake flange just to be sure. If you have the older 4 bolt…

The SuperSprings Custom Suspension Stabilizer and Sway Control Kit #SSA22 is listed to fit and install above the leaf springs on your 2019 Coachmen Leprechaun 319MB. I tried looking up a photo of the suspension on your motorhome but I could find…

For wheels with smaller hand holes like your setup has we know the Wheel Masters 4 Hose Inflation Kit #WM8001-135 would work well. Check out the attached picture and you can see them installed on a similar style wheel.

Yes, the Wheel Masters 4-Hose Inflation Kit #WM8001-135 that you referenced does fit your 2018 Ford F-450 dually. I checked the wheel size of your vehicle (19-1/2 inch diameter) and found that it uses the correct size to use this kit.

From the connection point to the end of the bend in the Wheel Masters 4-Hose Inflation Kit #WM8001-135 is approximately 1-1/2" in length. You could try sticking a tape measure in there and measuring out 1-1/2" at a 135 degree angle to see…

There isn't a retention strap currently offered to keep the first two panels of the BAKFlip G2 Hard Tonneau Cover #BAK26204 open while towing but you could easily make two with some straps and side-release buckles. I recommend picking up the…

Thanks for the pictures, I can see why you're concerned now. It looks like you have some 135 degree valve extenders that just aren't quite long enough to pass through the hand holes of the wheel cover. You could try using a longer 180 degree…