Pull Rating for the CE Smith Tie-Down Bracket for Trailers # CE26214G
Question:
What are these rated at for pulling before bending. Looking to mount them on my trailer floor and want to use 4 to tie down full size ATV.
asked by: Chuck
Expert Reply:
I spoke with my contact at CE Smith and unfortunately they do not have a pull rating for the tie-down bracket # CE26214G. However, he did say that because the brackets are 7 gauge steel, 2 inches wide you should have no problems securely tying down a full-sized ATV to your trailer.
I have included a link to a video showing the dimensions of the brackets.
A second option would be the Brophy Utility Trailer D-Ring Tie Down # LRB1 which has a 1/2" ring diameter and measures 2-1/2" x 2-3/8" with a 2" hole. The # LRB1 has a 2,750 working load limit and 11,000 minimum breaking strength.
If you would prefer a recessed option we have the Brophy Utility Trailer D-Ring Tie Down # RR05. This tie-down has maximum load (break strength) of 16,000 pounds and a safe working load limit of 5,000 pounds.
In order to mount # RR05, you will need a hole that is 3-3/8 inches in diameter. We recommend you use the backing plate system if you are not attaching this to either a trailer frame or trailer with a steel bed. The Brophy # RR5K includes the backing plate and all necessary hardware
I have attached a short video showing an installation of the Brophy tie-down kit.
Products Referenced in This Question
Brophy D-Ring Tie Down Anchor - Bolt-On - 2-3/8" Wide - Surface Mount - 4,000 lbs
- Tie Down Anchors
- Trailer Tie-Down Anchors
- Truck Tie-Down Anchors
- Tie-Down Cleats and Rings
- 4000 lbs
- D-Ring
- Surface Mount - Bolt-On
- Brophy
more information >
Brophy D-Ring Tie Down Anchor - Bolt-On - 4-7/8" Wide - Recessed Mount - 1,600 lbs
- Tie Down Anchors
- Trailer Tie-Down Anchors
- Truck Tie-Down Anchors
- Tie-Down Cleats and Rings
- 1600 lbs
- D-Ring
- Recessed Mount
- Brophy
more information >
Brophy D-Ring Tie Down Anchor w Backing Plate - Bolt-On - 1/2" Wide - Recessed - 1,600 lbs
- Tie Down Anchors
- Trailer Tie-Down Anchors
- Truck Tie-Down Anchors
- Tie-Down Cleats and Rings
- 1600 lbs
- D-Ring
- Surface Mount - Bolt-On
- Brophy
more information >
Product Page this Question was Asked From
CE Smith Tie-Down Bracket for Boat Trailers - Galvanized Steel - Bolt On - Qty 1
- Boat Trailer Parts
- Tie-Down Anchors
- Tie-Down Anchor Brackets
- 1-15/16 Inch Wide
- 4 Inch Long
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: CE Smith Tie-Down Bracket for Boat Trailers - Galvanized Steel - Bolt On - Qty 1
- Shop: Brophy D-Ring Tie Down Anchor - Bolt-On - 2-3/8" Wide - Surface Mount - 4,000 lbs
- Search Results: tie down bracket
- Shop: Trailer Hitch
- Video: Choosing the Right Trailer Wiring
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Search Results: 25580
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Article: Trailer Tire Sizing
- Shop: Trailer Wiring
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Search Results: fender
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Brake Controller
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer jack
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: safety chains
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Choosing the Right Brake Controller
- Shop: Gooseneck Hitch
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Search Results: leaf spring
- Article: Most Popular Wheel Bearings
- Shop: Suspension Enhancement
- Search Results: lug nut
on Boat Trailer Parts
