How Much Does the Curt Front Hitch for a 2017 Honda Ridgeline Weigh?

Question

Question:

How much does this hitch weigh?

asked by: Jay W

0

Expert Reply:

The Curt Front Mount Trailer Hitch item # C31082 weighs 28 lbs. It is confirmed to fit the 2017 Honda Ridgeline.

I have attached the installation instructions below so you can see how to get this hitch set up.

expert reply by: Jerred H

0

Answer 1

The Curt front hitch part #C31082 that we offer for your 2019 Honda Pilot does not require any front fascia or bumper trimming to install but you will need to remove a lower fascia panel. You can trim and reinstall it if you like though. I attached a…

view full answer...

Answer 2

We currently have two different front mounted hitch options for your 2017 Honda Ridgeline. This being the Curt Front Mount Trailer Hitch Receiver part #C31082 and the Draw-Tite Front Mount Trailer Hitch Receiver part #65073. According to the…

view full answer...

Answer 3

The Curt Front Mount Trailer Hitch #C31082 sits up really close to the bottom of the front bumper on your 2019 Honda Ridgeline, so while it will have an effect on ground clearance, it's not by much at all. We had a customer install install the…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

The EcoHitch Hidden Trailer Hitch Receiver #EH35VR may interfere with the Hands-free Liftgate sensor like all of the other hitches. Typically this means you will need to place your foot on either side of the receiver tube in order to activate the…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Thanks for the pictures! 2" hitches do not all have a 5,000 lbs capacity. The capacity varies by vehicle. That is an old Reese 06497 hitch and the sticker is correct. It does indeed top out at 3,500 lbs. It looks like this hitch came on all of…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...