Replacement Power Supply for Thomas Payne Seismic and Momentum Series Sofas

Question

Question:

I HAVE A THOMAS PAYANE GRAND DESIGN RECLINING SOFA #7787114 I NEED A POWER SUPPLY FOR IT .DO YOU HAVE ONE THANKS

asked by: Frank B

0

Expert Reply:

I wasn't able to find anything with that part number, but if you have a Seismic series sofa, then you'd want the Replacement Power Cord with Power Supply Box for Thomas Payne Seismic RV Power Reclining Sofas # 195-000111, but if you have a Momentum series sofa then you'd want the Replacement 12V Cord for Thomas Payne Momentum Recliners and Sofas # 195-387595.

expert reply by: Bryce D

0

Answer 1

I hope that I am understanding what you are needing correctly. We do have the Replacement Power Cord with Power Supply Box for Thomas Payne Seismic RV Power Reclining Sofas #195-000111 which is the 2-pin power cord that powers the Thomas Payne…

view full answer...

Answer 2

You would not want to plug your Thomas Payne recliner directly into your control panel. The recliner is not fused so if there was a power surge you could fry the wiring running to the couch and all of the electrical components like the powered…

view full answer...

Answer 3

What you have there is a Thomas Payne brand Recliner which is made by Lippert Components. I am not aware of a manual release for the foot rest. A lot of times issues like this are the result of a bad control box. This would not be something we carry…

view full answer...

Answer 4

The Replacement Lift Assist Strut for Lippert SolidStep RV Steps #LC47UD is for the Lippert SolidStep RV Steps for 29" to 36" Wide Doorways #LC791573, which has 3 steps. If you can give me the exact model of your steps I'd be happy to…

view full answer...

Answer 5

I'm assuming you currently have electric brakes on your 5th wheel. The #KOD55FR, #KOD33FR, and #HSE7K-T1 you looked at will all fit your axles. Between the three, I recommend going with the Hydrastar Disc Brake Kit since it includes everything…

view full answer...

Answer 6

It sounds like you've got a Thomas Payne Seismic Dual Power Reclining RV Loveseat w Console, Heat, Massage, LEDs like the #195-091-092-090, and you need the power plug for it. In this case you'll want to use the Replacement Power Cord with…

view full answer...

Answer 7

To find out what model Dometic AC unit you have you'll need to remove the inside air filter cover and then using a flash light look toward the rear of the unit and on the passenger side of the intake chamber on the AC bulkhead will be a tag. If…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...