Roof Mount Carrier for 6 Inch Diameter PVC Pipe Filled with Vaulting Poles

Question

Question:

Hello, I am looking at these to hold 6 inch PVC pipe carrier for carrying vaulting poles. How wide do the brackets expand and how tall are they? Thank you!

asked by: Paul J

0

Expert Reply:

There is actually a carrier specifically for your application. Well, not vaulting poles, but 6 inch PVC pipe. Take a look at Conduit Carrier Kit # RP7054900. It fits 6 inch diameter PVC schedule 40 or 80 and this set up can be locked using a padlock with 7/16" max diameter shackle.

The Rhino-Rack carrier # RRRMPHU is not large enough to properly support a 6 inch diameter pipe. The straps also would have a hard time reaching all the way around.

expert reply by: Michael H

0

Answer 1

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 2

The Rhino-Rack Conduit Endcaps #RR92SV is designed for Schedule 40 PVC pipes which are 3.9 inch diameter.

view full answer...

Answer 3

Yes, the Rhino-Rack Multipurpose Holders #RRRMPHU can be turned so that you can carry items on the single crossbar rather than from front to back crossbar.

view full answer...

Answer 4

Hey Tim! Yes, the Rhino-Rack Ski and Fishing Rod Carrier #RR572 will fit the older Thule square crossbars. While this kit does come with T-Slot hardware, it also has the clamps which is what you'll use for the square crossbars.

view full answer...

Answer 5

The attachment hardware comes as part of the kit with the Yakima Spare Tire With 5 Spoke Rim, part #Y08121. We do not carry the attachment hardware in our product line as a stand-alone item. I pulled one of the Yakima Spare Tire with 5 Spoke Rim,…

view full answer...

Answer 6

I measured the widths of the c-channel on the Rhino Rack Vortex Aero Crossbars and the bottom width is 7/8 inches and the neck width is 7/16 inches. I have attached a photo showing these measurements for you to check out. As long as the t-bolts on…

view full answer...

Answer 7

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

view full answer...

Answer 8

The bolts included in the Thule Xadapt8 adapter #XADAPT8 do fit the T-slot that is in the tops of the AeroBlade bars. The only question that remains is what are you going to thread them into to hold your various accessories? You might instead…

view full answer...

Answer 9

The Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount like #RTC16 will work with the Thule Tracker II feet. The Rhino-Rack Tracks are the same size as the Thule tracks.

view full answer...

Answer 10

The inside diameter of the Rhino-Rack Multipurpose Holders #RRRMPHU is 2-1/4" wide x 2-1/4" high. The length doesn't really matter as whatever you will be carrying will likely extend in front of or behind the holders. The straps that…

view full answer...

Answer 11

I contacted the manufacturer for you, and was told the Yakima SkinnyWarrior Roof Rack Cargo Basket #Y07014 measures 11" from outside to outside of the middle bars. Then from the outside of the basket itself to the inside of the closest bar is…

view full answer...

Answer 12

I have a solution for you. I reached out to Rhino-Rack, and they could not confirm for sure that the mounting brackets of the Folding Ladder for Rhino-Rack Pioneer Platform Racks - Aluminum #RRRAFL-RUFLB will be able to fit the channels on your…

view full answer...

Roof Mount Carrier for 6 Inch Diameter PVC Pipe Filled with Vaulting Poles

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching