Replacement Fender Options For a Utility Trailer With 32" Between Fender Mounting Brackets

Question

Question:

our utility trailer has 15 in tires and the metal fenders are starting to rust through in a few places so we thought we could use these as a skin just attach them to the outside of the existing but one of the critical dimensions is the existing is a 32-in diameter you list your product as 32 inches long wondering does that mean diameter? and are these available in plastic?

asked by: Tim

0

Expert Reply:

The Single Axle Trailer Fender # HP56VR is 32" long at its widest portion of the fender. The fender is also 9" wide and 15" tall which you can compare to your current fenders to determine if this will work as a replacement. We do have the Fulton # F008564 plastic fenders which may work for your application. These fenders are 31-5/16" long at the widest point. They are also designed for a 14" wheel and tire but you can verify if they will fit with the 9-11/16" width and 12-3/4" height.

expert reply by: Bud M

0

Fender Width Measurement
(click to enlarge)

Answer 1

All of the replacement locking cylinders we have for the UWS toolboxes have the same dimensions and catch arm length. The cores are keyed differently but other than this feature they are virtually identical. The only thing I can think of as to why…

view full answer...

Answer 2

I recommend the Optronics LED trailer light kit #TL16RK. The kit includes 2 LED tail lights, 2 amber side marker and clearance lights, license plate bracket, wiring harness and stainless steel mounting hardware. I also recommend getting a deluxe…

view full answer...

Answer 3

I have looked through the various steel trailer fenders we offer, and have not found any that match the exact measurements you provided. The closest fender I found was the CE Smith Pre-Galvanized Steel Fender, part #CE17701G. This fender measures…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 6

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 7

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 8

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 9

I am sorry I don't have any tires that are going to fit your rim. I do have a couple of comparable size tires that come in a wheel tire combo. I have listed the two below along with their lug patterns. 5 on 4-1/2 Lug Pattern - Kenda 205/65-10…

view full answer...

Answer 10

You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

For a single axle trailer, you want the shackle strap to be able to move so that you have the spring deflection needed for your suspension. Angled like the photo or even almost vertical is fine you just don't want the shackle strap to bind and…

view full answer...