bing tracking image
Q & A Icon

Replacing Axles Brakes And Hubs On A 1998 Carson Enclosed Trailer  

Question:

Hi, I have a 1998 Carson racer 20ft enclosed trailer. It has dual axles. I need to replace 1 of the axles. I have tried to contact Carson trailer to find out the weight capacity that I need but no luck. I need the axle and hubs with brakes. Can you recommend anything? Its 95 hub to hub, 80 from spring center, I believe the hub is 5 on 5. Thank you

0

Expert Reply:

We do indeed carry axles with a 95 hub face and 80" spring center. Knowing that it is a 5 lug hub, you are likely dealing with a 3,500 lb rated axle. If you want to confirm this you could always measure the diameter of the axle tube. A 3,500 lb axle should have a 2-3/8" tube diameter. If it is a higher capacity it would be a 3" tube. Provided all of that checks out, you will need the following parts for an axle, brakes and hubs.

Trailer Axle Beam # e68GR
Electric Trailer Brake Kit # AKEBRK-35-SA (sold as a pair)
Trailer Hub and Drum Assembly # AKHD-550-35-EZ-K (sold individually)

I would like to add that the 5 on 5 bolt pattern is uncommon, and we do like to confirm the bolt pattern prior to ordering if possible. A 5 lug pattern is measured from the center of one lug, to the outside edge of either lug across from it. This will give you the true bolt pattern measurement.

expert reply by:
0
Jesse M

Products Referenced in This Question




Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>