Recommended Suspension Enhancement for a 2023 Ford F-250 W/ an In Bed Hitch

Question

Question:

I have an in-bed 5th wheel hitch on my 2023 Ford F-250, will these springs fit or no?

asked by: Brittany

0

Expert Reply:

Yes, the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers # AL29DQ will fit no problem with an existing 5th wheel hitch in the bed.

These springs are made in the USA, a load leveling capacity of up to 5,000 lbs, and includes manual inflation valves and air lines.

expert reply by: Bryce D

0

Answer 1

There's not many differences between the Air Lift WirelessONE item #AL25980EZ and item #AL25980. The main difference is that the item #AL25980EZ has a slightly higher CFM at 1.03 compared to 0.92 and it runs slightly more efficient at 9% over 15%…

view full answer...

Answer 2

Sounds like you may have ran the power wire of the Air Lift Compressor kit part #AL25980EZ to a keyed power source instead of to the vehicle battery so when you turn the vehicle off the compressor loses all power and upon start up resets. The red…

view full answer...

Answer 3

Yes! the Air Lift Load Lifter 5000 #AL88399 attaches to the bottom of your 2020 Ford F-250's frame it will easily fit with most any gooseneck hitch you have installed in your truck to attach your fifth wheel hitch to. This installs by removing…

view full answer...

Answer 4

Thank you for your purchase from etrailer of the Air Lift WirelessONE Compressor #AL25980EZ. The pink wire is an optional ignition source connection and does not have to be hooked up; it will just allow the #AL25980EZ to make adjustments right when…

view full answer...

Answer 5

I took a look at the Air Lift WirelessONE Compressor System for Air Helper Springs #AL25980EZ you are inquiring about and you actually can't add an air tank to this system unfortunately. This system has an EZ mount that comes pre-assembled with 3…

view full answer...

Answer 6

There's no reason you couldn't install the Air Lift WirelessONE Compressor System #AL25980EZ in the interior of your truck but you should note that it will be much louder in this location. It wouldn't be unbearably loud but you will…

view full answer...

Answer 7

The Air Lift WirelessAIR Compressor System part #AL74000EZ will work just fine being mounted on the outside of the frame. There will be no issues here even at a carwash as this is actually the default location the unit is intended to be installed.

view full answer...

Answer 8

There aren't any air compressor systems designed specifically for the Air Lift LoadLifter 5000 Ultimate Plus Air Springs. These air springs will use the same air compressor kit as any other air springs. There are fittings that come with the air…

view full answer...

Answer 9

When wiring up the Air Lift WirelessONE Compressor System for Air Helper Springs - Remote and Mobile App #AL25980EZ the power wire needs at least 15 amps to power the unit and the keyed power source that runs to the ignition switch circuit needs at…

view full answer...

Answer 10

The Air Lift WirelessAIR Compressor System for Air Helper Springs #AL74000EZ comes with an EZ-Mount that will allow you to mount the compressor to the frame of your 2019 Ram 3500 without drilling into it. You'll just want to pick up some zip-ties…

view full answer...

Answer 11

The Air Lift WirelessONE Compressor System for Air Helper Springs #AL25980EZ is only controlled via the wireless controller and/or through Bluetooth with the app. If neither of those are working then the whole system needs to go through…

view full answer...

Answer 12

The Air Lift WirelessONE Compressor System for Air Helper Springs - Remote and Mobile App - EZ Mount #AL25980EZ has a heavy-duty compressor. I confirmed this with the manufacturer. They updated the compressor from the previous standard duty…

view full answer...

Recommended Suspension Enhancement for a 2023 Ford F-250 W/ an In Bed Hitch

Product Page this Question was Asked From

Continue Researching