Width of Timbren Trailer Suspension Enhancement System for Underslung Axles Mounting Brackets

Question

Question:

Can you please tell me the width of the bracket longest side of the Timbren T92MR marked in attached photo. Thank you

asked by: Dan S

0

Expert Reply:

The width of the Timbren Trailer Suspension Enhancement System for Underslung Axles # T92MR mounting brackets is 4-1/2". I've attached a photo for your reference.

expert reply by: Jon G

0

Width of Timbren Trailer Suspension Enhancement System for Underslung Axles Mounting Brackets
(click to enlarge)

Answer 1

The voltage at your 5 o'clock plug on your 7-Way trailer connector like #HM40975 should be between the 0.9 you are getting and 12 volts. Test this plug with an incandescent circuit tester like #PTW2993 because it will have a draw on the wire that…

view full answer...

Answer 2

From what I've been able to determine, your 2016 Forest River Vibe Extreme Lite 224rls travel trailer uses tandem 3500 lb axles, which means that you'll need standard 10 2-1/4 inch brake assemblies. I'd recommend self-adjusting brakes…

view full answer...

Answer 3

Yes, the TruRyde Electric Trailer Brake Kit #TRU96FR will fit the 7,000lb Dexter axles on your 2020 Grand Design Solitude 375. We do also have the Dexter Nev-R-Adjust Electric Trailer Brake Kit #23-464-465 if you prefer to keep the axle components…

view full answer...

Answer 4

Yes, the Dexter Electric Trailer Brake Kit part #23-180-181 (23-180 + 23-181) is a top of the line option so if you are looking for a more cost effective solution I recommend the Electric Trailer Brake Kit part #AKEBRK-7-SA instead. These brakes are…

view full answer...

Answer 5

The 7k Dexter brake assembly set part #23-180-181 will fit on your 5,200 lb axles and will have a bigger magnet. The problem you may find is that the bigger magnet might make it harder to get the brakes dialed in perfectly as they might come on too…

view full answer...

Answer 6

To find the correct replacement electric drum brakes for your 2007 Weekend Warrior LE3105 you'll need to know the axle capacity. To find yours you'll just need to look on the axles for the axle tag, which will tell you the capacity. Given…

view full answer...

Answer 7

Yes, 7k trailer axle brake assemblies like #23-180-181 will fit 6k axle hub/drums. They use the exact same dimensions and bolt patterns which allows that. The difference is the strength or sensitivity of the magnets in the assemblies. The 7k axles…

view full answer...

Answer 8

The only difference between the Dexter Electric Trailer Brake Kit part #23-180-181 and Dexter Nev-R-Adjust Electric Trailer Brake Kit part #23-464-465 is that the latter is self-adjusting which means the pads will automatically adjust for the best…

view full answer...

Answer 9

According to SumoSprings, 6" is the minimum for the #TSS-106-40. I asked them about this and they said you cannot use these if the space is under 6" so unfortunately they won't work for you. Doing so will overload the springs which can…

view full answer...

Answer 10

Some trailers do have shock absorbers; it isn't all that common but is gaining popularity, mostly among camping trailers. The main reason it's not too common is most people aren't worried about the ride being that smooth. Usually the…

view full answer...

Answer 11

The Timbren Trailer Suspension Enhancement System for Underslung Axles #T92MR is 5-1/4" tall. Timbren recommends The spring be in constant contact with the frame at all times. So ideally you will want exactly 5-1/4" from your axle tube to…

view full answer...

Answer 12

Installing a 4,000 lb capacity leaf spring on a trailer with a 3,500 lb capacity axle will make the suspension stiffer which could then in turn minimize the risk of the axle contacting the frame. However, this is not what I recommend to fix your…

view full answer...

Width of Timbren Trailer Suspension Enhancement System for Underslung Axles Mounting Brackets

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching