MORryde Cushioned Equalizer Kit that Fits 2019 Keystone Cougar 22RBS

Question

Question:

I am looking into upgrading my stock tandem axle equalizer and shackles. I have a 2019 Keystone Cougar Half Ton 22RBS. I would like to get the MORryde system, so if you could let me know what part numbers I need that would be greatly appreciated. Thank you

asked by: Jon R

0

Expert Reply:

The MORryde cushioned equalizer kit part # MR87ZR will work great on your 2019 Keystone Cougar Half Ton 22RBSand then for a shackle kit you'd want the part # MR58ZR for a 2-1/4 inch long shackle or part # MR76ZR for 3-1/8 inch. You'd have to measure what you have now to know which you'd need as there isn't a way for me to look that up.

expert reply by: Jameson C

0

Answer 1

Sure thing; what your tandem axle Grand Design has are Dexter E-Z Flex equalizers and you have 2-1/4" shackle straps, so what you can use is an upgrade kit from MORryde: - MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4"…

view full answer...

Answer 2

Yes, the MORryde Suspension Upgrade Kit #MR46ZR that you referenced is correct replacement wet bolt, bushing, and shackle kit for the CRE3000 kit that you have.

view full answer...

Answer 3

When looking for replacement equalizers axle spread is a guide and will not give you an exact this fits or doesn't. What you'll need to do is measure center to center of the horizontal holes, and from the center of the top hole to the center…

view full answer...

Answer 4

Hey Beatrice, To find the right fit for your trailer's suspension you'll need to take a quick measurement of your current shackle straps. You'll need to measure from the center of one bolt hole to the center of the other bolt hole. The…

view full answer...

Answer 5

You will measure the MORryde Suspension Upgrade Kit for Tandem Axle Trailers #MR76ZR from the center of each hole on the shackle strap.

view full answer...

Answer 6

You would need to go out to your trailer and measure the distance between the bolt hole centers of your current shackles to determine if you need the part #MR46ZR which is 2-1/4 inches or part #MR76ZR which is 3-1/8 inch.

view full answer...

Answer 7

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but they…

view full answer...

Answer 8

The absolute best cushioned equalizer that fits the dimensions you mentioned having would be the MORryde ALLTREK 4000 part #MR89DR as this is only option to provide vertical and horizontal cushioning. This would make a big difference and you'd be…

view full answer...

Answer 9

Yes, axle spread and wheel base by definition are the same measurements. You will measure from the center of one axle to the center of the 2nd axle to determine what you axle spread is. This may be difficult as some wheels and covers will make this…

view full answer...

Answer 10

Well shackle length is mainly based on the height difference between the front and rear hangers. The rear hanger normally doesn't hang as low as the front so that the shackle can offset the difference and add the ability to move. What is the…

view full answer...

Answer 11

Hey Doug, thanks for reaching out! The MORryde ALLTREK 4000 #MR89DR dimensions can be a bit difficult to explain via text so I've attached an image giving you the dimensions you're asking about!

view full answer...

Answer 12

It looks like your MORryde ALLTREK 4000 Shock Absorbing Equalizers #MR89DR are longer than your previous equalizers were because your leaf springs are way too close to each other. The shackles should be creating more of a "W" shape instead…

view full answer...

MORryde Cushioned Equalizer Kit that Fits 2019 Keystone Cougar 22RBS

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching