Steps To Figure Out Which MORryde CRE3000 Equalizers Fit 33-1/2" Axle Spacing I want to upgrade t

Question:

I have a 2019 Wolfpack 325/13 I want to upgrade to the CRE3000, but my wheel base is 33.5” will the 33” be fine also adding the wet bolt kit but my shackles are 2.5” which will work best?

asked by: Joshua M

Expert Reply:

When looking for replacement equalizers axle spread is a guide and will not give you an exact this fits or doesn't.

What you'll need to do is measure center to center of the horizontal holes, and from the center of the top hole to the center line of the lower holes. This is shown in the below diagram of the MORryde # MR87ZR you were looking at, so as long as you get measurements of 6-1/2" and 3-1/8" this will be the correct replacement for your 2019 Wolfpack 325/13.

If you find a different measurement then just send that over and I'd be happy to get you the right parts.

For the shackles since you know yours measure 2-1/2" center to center of the mounting holes you'll need to go with the # MR46ZR. These are a little shorter but that small difference won't matter.

expert reply by: Samuel C