Where Are Bulletproof Hitches Made?

Question

Question:

etrailer.com Representative, Where are the BulletProof Hitches Shackle 358smallshackle materials sourced and the shackles manufactured? Thanks for the prompt reply.

asked by: Inthedell

0

Expert Reply:

All Bulletproof Hitch products, including the # 358smallshackle are sourced and made here in the United States. Their headquarters is in Bradenton, Florida.

expert reply by: Jesse M

0

Answer 1

Both the Fastway e2 and Blue Ox TrackPro are going to provide your 7,000 lb GVWR 2021 Micro Minnie 2108DS with excellent leveling and sway control at the spring bars, but there are a couple of distinctions between the two. First, let's just…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

view full answer...

Answer 6

I would love to help but I can't really tell you if you need the B&W Tow & Stow 2-Ball Mount with 5" Drop part #BWTS20037B (part #BWTS20037C) or 7" Drop part #BWTS20040B (part #BWTS20040C) as it varies by application so you will…

view full answer...

Answer 7

The B&W Tow and Stow ball mount #BWTS10049B will have some great features. You can stow the mounting platform that has the 3 hitch balls (1-7/8, 2, and 2-5/16 inch) underneath your vehicle. This is nice because you will eliminate the possibility…

view full answer...

Answer 8

From the top of the B and W Tow and Stow part #BWTS10043B down to the bottom of the unused ball when it is in it's lowest position measures 14 inches. The 7 inch drop version part #BWTS10040B instead has this distance at 12 inches.

view full answer...

Answer 9

The StabiliTrak that's built into your GMC Sierra does the same thing that the Curt True Course Advanced Bluetooth Trailer Sway Control #C94VV does, so you'd have to disable the built in TSC to use it. Since they're the same thing,…

view full answer...

Answer 10

I recommend using the Curt Lock Set #C23556 for your Curt Adjustable 2-Ball Mount #C99NR. This comes with a lock for the hitch receiver and one for the ball mount platform. Even though your platform uses 2 pins, only 1 locking pin is needed to secure…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Where Are Bulletproof Hitches Made?

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching