bing tracking image
Q & A Icon

How to Wire Older Tekonsha Brake Controller 5288 to 2009 Dodge Ram 2500  

Question:

I purchased a 2009 3/4 ton dodge ram that came with aelectric brake kit harness p/n 56045795AB revA1 which have four wires colored solid blue heavy gauge, blue/white,green/black and white/red, have p/n 5288 controller.

0

Expert Reply:

We have put together a chart for matching vehicle wiring to the standard 4 colors on the brake controllers. The colors will wire as follows: white/red to black, blue/white to red, green/black to white, and blue to blue. I will include a link to the page with this chart on it. It is toward the middle of the page. All you have to do is follow the wire color chart and make sure your connections are good and your brake controller should work fine.

If your Dodge has the port connected to the wires and you are looking for a connector to use, you need part # 3020-P. You would cut off the black connector and match the colors for the wires on the back of the brake controller and the wire leads for the connector, then plug the connector into the port.

expert reply by:
0
Patrick B

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>