Recommended 3,500LB Axle For Mounting On a Ironton 5' X 8' Trailer
Question:
Is it possible to install an axle that is 89inch hub face on an Ironton 5x8 trailer that normally uses a 72inch hub face axle? I want to upgrade my trailer to 3500lb capacity and the only one I see listed is T3584F-EZ-8974 which shows 74inch spring center and 89inch hub face. Will the extra 8inch or so of axle extending beyond the trailer frame cause an issue? Thank you!
asked by: ChrisT
Expert Reply:
I do have a recommendation for you as you will not want to use the longer 89" hub face axle. This would cause the axle to easily bend since you would have to relocate the spring perches so far inward there would be additional stress on the axle tube.
I recommend looking at the Timbren Axle-Less Trailer Suspension w Idler Hubs # A35RS545. This is a better option as it will give you a much better suspension than traditional leaf springs. The unit will bolt to the trailer frame and places the hub face 6" our from the frame and the axle center line will be 3-13/16" below the bottom of the frame. The axle includes idler hubs with the common 5 on 4-1/2" bolt pattern.
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension w Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 3,500 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Continue Researching
- Search Results: bearing grease
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: LubriMatic Prime Guard High Temperature Wheel Bearing Grease - Red - 16-oz Can
- Shop: Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 2K
- Q&A: Swivel Jack for Lightweight Utility Trailer
- Q&A: How To Upgrade Speed Rating Of 40x48 Ironton Utility Trailer
- Q&A: Recommendation to Upgrade Axle and Hubs on Northern Hardware Trailer
- Q&A: Recommended Tire and Wheel Combo for my Ironton 5x8 Utility Trailer
- Q&A: Can I Upgrade the 4.80-12 Wheels and Tires on a Northern Tool Ironton Trailer
- Shop: Trailer Hitch
- Search Results: 25580
- Q&A: How to Measure Hub Face of Mobile Home Hub and Drum
- Article: Most Popular Wheel Bearings
- Shop: Trailer Wiring
- Shop: Grease Seals 10-36 (pair)
- Search Results: 44649
- Article: Trailer Wiring Diagrams
- Q&A: Hub And Drum Replacement for 90865 Rockwell Hub and Drum
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Search Results: 68149
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Brake Controller
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Search Results: dust cap
- Video: etrailer Electric Trailer Brake Kit Installation
- Shop: Gooseneck Hitch
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Article: Trailer Tire Sizing
- Shop: Fifth Wheel Hitch
- Video: TruRyde Bearing Kit for #84 Spindle Installation