Safety Chain Loop Quick Link Recommendation for a 2021 Chevy Silverado 1500

Question

Question:

What size of these durabilt connectors do you recommend for my 2021 Silverado 1500? The chain loops aren't terrible, but I tow often enough I'd like the connection to be quicker and easier. Thanks!

asked by: Loren

0

Expert Reply:

I recommend picking up the Durabilt Safety Chain Connectors for 5/8" Chain # DU55QR for use with your 2021 Chevy Silverado 1500. These have a safe Working Load Limit of 18,100 lbs so they will be able to handle pretty much anything you want to tow with your pickup.

Happy towing!

expert reply by: Jon G

0

Answer 1

From the top of the B and W Tow and Stow part #BWTS10043B down to the bottom of the unused ball when it is in it's lowest position measures 14 inches. The 7 inch drop version part #BWTS10040B instead has this distance at 12 inches.

view full answer...

Answer 2

From the top of the shank to the bottom of the vertical section of the B&W Tow & Stow 2-Ball Mount #BWTS10040B measures 10". Then with the 2" hitch ball in the lowest position the 2-5/16" hitch ball will sit about 12"…

view full answer...

Answer 3

Hello Stephen, so the Durabilt Hammerlock Coupling Link #DU84GR is made for a 5/8" chain link and is the largest size we offer. I do not have a way to know the exact dimensions of the oval safety chain loops on your hitch, so I do suggest…

view full answer...

Answer 4

When adjusted so it's at its maximum drop, the B & W #BWTS10040B Adjustable Ball Mount measures 7 inches from the inside top of the receiver to the base of the trailer ball, at maximum rise, the height difference is 7-1/2 inches as shown in…

view full answer...

Answer 5

I do have an option for you but I can't confirm the Blue Ox KarGard Towed Vehicle Protector part #BX8870 fits the Roadmaster Falcon 2 Tow Bar for Blue Ox Base Plates part #RM-525. The vehicle guards/protectors are rather specific to the brand of…

view full answer...

Answer 6

I was able to verify the Durabilt Hammerlock Coupling Link for 5/8" Chain #DU84GR does have the 8.2T stamped on the link for the WLL. This measurement is give in metric tons which is 2,205lbs per ton. This is the reason you see the 18,100lb…

view full answer...

Answer 7

The Brophy Swiveling D-Ring Anchors w Backing Plates and Hardware #RR6K-4 uses grade 5 hardware for attaching to your trailer. The included parts and hardware are all Zinc coated for corrosion resistance. The 16 bolts themselves are 5/16" in…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Hi Robert; hopefully your Roadmaster tow bar is one that attaches to direct-connect base plates as opposed to crossbar base plates; for example the 8,000 lb Roadmaster Sterling would be optimal. Assuming that, here is what you need to flat tow your…

view full answer...

Answer 10

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Safety Chain Loop Quick Link Recommendation for a 2021 Chevy Silverado 1500

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching