Weight Capacity Of The Timbren Axle-Less Trailer Suspension w/ Idler Hubs # A20RS545

Question

Question:

Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No - 5 on 4-1/2 - 2K Item # A20RS545 is this 2k each for 4 k total weight or 1k each

asked by: Shawn S

0

Expert Reply:

The Timbren Axle-Less Trailer Suspension w/ Idler Hubs # A20RS545 is made up of two separate suspensions that are each rated for 2,000lbs, which would equal a 2,000lb total capacity.

expert reply by: Kevin C

0

Answer 1

The Timbren Axle-Less Trailer Suspension System #A20RS545 will work well on a boat trailer. It has a heavy-duty steel construction which doesn't make it the best option for a salt water application, but it does have a black powder coat finish…

view full answer...

Answer 2

I have a solution for you, but none of the straight axles with a 2,000 lbs capacity that we carry have the 46-5/8 inches spring mount to mount measurement. I recommend that you take a look at the Timbren Axle-Less Trailer Suspension System,…

view full answer...

Answer 3

We don't have an axle compatible with center of spring to center of spring dimension of 42 inches. We do however have an axle-less system that will work. I recommend the Timbren Axle-Less Trailer Suspension System with Hubs - 4 on 4 - Regular…

view full answer...

Answer 4

You are correct, the Aeon spring does indeed function as a dampener, and should not need additional dampening. Each unit is rated at a 1000 lb capacity, so two sets or four units would provide a 4000 lb capacity. The 2-5/8 inch dimension shown is the…

view full answer...

Answer 5

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 6

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Your math is correct in your trailer weight load example. If a fully-loaded tandem axle trailer weighs 4000-lbs then each of the 4 tires will bear 1/4th of that load, or 1000-lbs. In this case a tire rated for 1300-lbs would provide a good safety…

view full answer...

Answer 9

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 10

The closest radial tire size I would have to replace the 4.80-12 bias tire size is the Kenda Karrier S-Trail ST145R12 Radial Trailer Tire #AM10130. The 4.80-12 bias tire is 20.7 inches tall and 4.9 inches wide. The 145R12 radial tire is 21.3 inches…

view full answer...

Answer 11

You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…

view full answer...

Answer 12

Good morning, Cliff. As of today (3/27/24) we are expecting the #KE33JR tire/wheel combo to be in stock in about 2 weeks. Hopefully this means we can take our own pictures and put them on the site within maybe about 3-4 weeks from now. What I can…

view full answer...