Wanting a Replacement Axel that Measures 46-5/8 Inches From Spring Mount to Spring Mount
Question:
I need an axle that would fit a 4x8 trailer/ It is 46 5/8 from spring to spring. Would like to get into the 2,000 lb range. But it wold appear that I would need to make some alterations on my trailer to get an axle to fit. Also what i have now is a 4 on 4 hub and would like to keep the same if possible. I did re-build the frame to beef it up last year.
asked by: RAY
Expert Reply:
I have a solution for you, but none of the straight axles with a 2,000 lbs capacity that we carry have the 46-5/8 inches spring mount to mount measurement.
I recommend that you take a look at the Timbren Axle-Less Trailer Suspension System, # A20RS440. With the Timbren system you will do away with the single straight axle and open up your under the trailer clearance. Also, the Timbren design with its two separate axles will give you a trailer with an independent suspension which will reduce trailer roll during cornering.
The Timbren system will include hubs that have the 4 on 4 inch wheel bolt pattern. There will be no needed to change hubs or wheels.
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 4 on 4 - 2,000 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 2000 lbs
- 4 on 4 Inch
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer jack
- Shop: Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 4 on 4 - 2,000 lbs
- Shop: Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 2K
- Shop: etrailer Boat Trailer Jack w/ Footplate - Sidewind - Fixed Mount - 29-1/8" Lift - Zinc - 2.5K
- Shop: Loadstar 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Search Results: trailer coupler
- Search Results: coupler
- Shop: Pro Series Round, Snap-Ring Swivel Jack - Bolt On - Topwind - 10" Lift - 2,000 lbs
- Shop: Timbren Silent Ride Suspension for Single Axle Trailers w/ 2" Square Axles - 3,500 lbs
- Shop: Channel Tongue Trailer Coupler - Trigger Latch - Zinc - 2" Ball - Bolt On - 5,000 lbs
- Video: etrailer Round Swivel Marine Jack with Dual Wheel Installation
- Video: Ark Xtreme Off-Road Ratcheting Trailer Jack Review
- Search Results: 2 trailer coupler
- Search Results: boat trailer jack
- Search Results: trailer valet
- Search Results: trailer alignment
- Q&A: Recommended Axle-Less Trailer Suspension System For Trailer With Springs 42 Inches On Center
- Video: trailer Round Pipe Mount Swivel Jack Review
- Video: Dutton-Lainson Drop Leg Trailer Jack with Footplate Review
- Video: Review of Maxion Wheels Trailer Tires and Wheels - Vesper Wheel Only - MX34FR
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Video: etrailer Sleeve-Lock Trailer Coupler Review
- Q&A: Weight Capacity Of The Timbren Axle-Less Trailer Suspension w/ Idler Hubs # A20RS545
- Q&A: Will the Timbren Axle-Less Trailer Suspension System Work for a Boat Trailer
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: Replacement Axle-Less Trailer Suspension Square Axle 49.5 Hub Face and 38.5 Spring Center
- Q&A: Does It Matter If the Spring Center and Hub Face Is Different When Replacing A Trailer Axle
- Q&A: Proper Spacing Between the Hub Face and Spring Center Locations for 7,000-lb Triple Axles
on Trailer Suspension Parts
