Recommended Roof Crossbars for a 2022 Volkswagen Atlas

Question

Question:

Will this bar fit a VW Atlas 2022?

asked by: Hassan

0

Expert Reply:

No, the Thule ProBar Evo Crossbars # TH713600 will not fit your 2022 Volkswagen Atlas. Instead, I recommend checking out the Thule WingBar Evo Crossbars # TH711420 with the Evo Raised Rail Feet for Thule Crossbars # TH710401.

These crossbars will clamp onto your factory rail, measure 53" long, and has a dynamic weight capacity of 220 lbs.

expert reply by: Bryce D

0

Answer 1

The Thule Hullavator Pro Kayak Carrier part #TH898 comes with the attachments that you will need for the channels/tracks on your Rhino-Rack Vortex Aero Crossbar so you will not need anything else for this. However, the Hullavator requires that you…

view full answer...

Answer 2

There is not a general restriction from Thule that says two Hullavator Kayak Carriers #TH898 can't be used on a Thule roof rack. As long as the crossbars on your Ford Escape have the required length for two sets and a sufficient weight capacity…

view full answer...

Answer 3

The absolute most crossbar space the Thule Hullavator part #TH898 can take up is 28-1/2 inches so you'd pretty easily be able to fit two of them on a 54 inch long crossbar like you have.

view full answer...

Answer 4

I have a replacement option for you, but I reached out to my contact at Thule and he confirmed that the older Thule Hullavator 897XT you have will unfortunately not fit your new Thule ProBar Evo Crossbars #TH713600. He mentioned that unfortunately…

view full answer...

Answer 5

If there was a way to lighten your kayak by 5 lbs the Thule Hullavator part #TH898 that you referenced would work great but it has a 75 lb weight capacity. This does fit the Rhino Rack Vortex Aero roof racks though like the part #RRVA137B-2,…

view full answer...

Answer 6

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 7

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 11

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...

Answer 12

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Recommended Roof Crossbars for a 2022 Volkswagen Atlas

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching