Locating The Correct Brake Switch Wire On A 2019 Kia Sorento

Question

Question:

I have a 2019 Kia Sorento and I dont know which of the 5 wires from the brake switch black, blue, green, orange and blue with black line I should connect the red wire coming from the brake controller to. thank you for helping me

asked by: Jérôme B

0

Expert Reply:

I can certainly point you in the right direction. Unfortunately I cannot tell you exactly what color wire to connect to, as these wire colors are not always universal. I recommend going in with a wire tester like the # PTW2993. You will need to probe each wire. You will be looking for the wire that is hot only when the brakes are applied. This will tell you where to connect the red wire coming off of your brake controller

expert reply by: Jesse M

0

Answer 1

With your trailer having a round plug instead of a flat plug you will need either one of a couple parts. If you do not already have a connector on your 2022 Kia Sportage you will need the T-One Vehicle Wiring Harness #118698. This will give you a…

view full answer...

Answer 2

Thanks for the pictures you sent! It looks like you don't have the right plug under your dash which is due to not having the factory tow package on your 2020 Ford Ranger. That's ok, since there's still a solution to adding…

view full answer...

Answer 3

I can help you identify this wire on your 2016 Kia Sedona, but we do not have specific information on the color of the wire. You will need to use a circuit tester like the #PTW2993. The cold side will be the wire that only has power when the brake…

view full answer...

Answer 4

It looks like you've got everything you need, except for a brake controller. The Curt #C51180 Echo Wireless Brake Controller would be very effective, with your vehicle being already pre-wired, the install would be plug and play. The only…

view full answer...

Answer 5

To complete the installation of the #RED24FR you need to find the cold side of the stop light switch. It will require using a circuit tester like the #PTW2993. This will be the wire that only has power when the brake pedal is pressed. Running an…

view full answer...

Answer 6

The red wire on a trailer brake controller like the Redarc Tow-Pro Liberty Brake Controller part #RED24FR when using the Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers part #RED69FR will need to be attached to the cold side…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

You do have the option to utilize the air brakes on your 2023 Freightliner Cascadia to control electric trailer brakes using the Hayes Air Actuated Trailer Brake Controller, part #HA100400C. However, we mostly recommend just using an electric brake…

view full answer...

Answer 11

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 12

You're right, the mounting bracket is unique (in a good way) for the Curt TriFlex NEXT Trailer Brake Controller #C24VV. The bracket is smaller and all you do is put the included adhesive tape on the bracket and stick it wherever you like under…

view full answer...

Locating The Correct Brake Switch Wire On A 2019 Kia Sorento

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching