Replacement Hydraulic Brake Kit for AxleTek B10H-41

Question

Question:

Hello, I have a 2014 tear trailer with hydraulic brakes. The label says B10H-41, Axletek - 10H-GG. I want to replace the brakes with a Kit. Do you carry these brakes or something similar? Thank you

asked by: Christopher T

0

Expert Reply:

For exact replacement brakes you need this kit:

- Hydraulic Trailer Brake Kit # AKUBRK-35

The B10H-41 number is for the driver side of the trailer while the B10H-42 in this kit is for the passenger side of the trailer.

Attached is an installation video for you to reference as well.

expert reply by: Jon G

0

Answer 1

The Atwood couplers have been discontinued for a bit so you'll be hard-pressed to find any replacement parts for them. We don't have any replacement parts for them anymore so I recommend just replacing the whole coupler with something…

view full answer...

Answer 2

You could use the #BH-T-3FIF to accomplish what you are looking for. You may need more than one depending on how many brake assemblies you have.

view full answer...

Answer 3

In order to find a replacement brake actuator you'll need a few bits of info such as the brake type, frame size, trailer weight, and hitch ball size. The Demco Hydraulic Brake Actuator part #DM72VR for example is for drum brakes, fits a 3"…

view full answer...

Answer 4

The Surge actuator you currently have installed is an older Atwood model. The cap for the brake fluid confirmed that for me once I saw it. Problem there is that Atwood is no longer in business and no replacements are available, unfortunately. We do…

view full answer...

Answer 5

There are a couple of ways to mount the Kodiak Tee Fitting for Hydraulic Brake Hose - Brass - 3/16" Female Inverted Flares #BH-T-3FIF. Many will use brake line mounting hardware on either side of the brake line which will provide enough…

view full answer...

Answer 6

As an installer, I much prefer rubber lines as they are easier to use. The steel lines are more durable but I can't say I've ever had a trailer we worked on come back with a broken rubber hose either. The steel lines are very hard to work…

view full answer...

Answer 7

If you are concerned with how to mount the Kodiak Tee Fitting part #BH-T-3FIF then I recommend using the Titan Tee Fitting part #T0778500. This fitting comes with a mounting bracket so you do not have to worry about the tee bouncing around. They both…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 10

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 11

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 12

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...