Can Replacement 17-rpm Lift Motor for Fan-Tastic Vent Be Manually Operated

Question

Question:

I installed fvk6010-81 replacement lift motor for Fantastic Fan and all seems to be working fine but I notice the new unit different two wing handle vs the x-shape handle on the old unit. The decal “push auto/pull manual” is also missing. Is there a redesign of the unit function for manual operation that does not require the handle to be pulled down?

asked by: Joseph H

1

Helpful Expert Reply:

The # FVK6010-81 does have a different design. You can still turn the knob for manual operation but you do not have to do the push and pull like the original for it to work.

expert reply by: Robin H

1

Answer 1

Based on the information I could find I see your 1989 Airstream Argosy uses Dura-Torque torsion axles. We currently only carry lift spacers confirmed to fit Dexter TorFlex and Lippert Torsion axles. We may be able to help you determine if one of…

view full answer...

Answer 2

I spoke with my contact at Fan-Tastic Fan who verified the replacement lift motor options for Country Coach Motorhomes manufactured prior to 2014. She let me know that you'll be able to determine the correct replacement motor based on the…

view full answer...

Answer 3

Good news! I was able to track down two 17 RPM fan lift motors to replace your original Fan-Tastic Vent motor. I spoke to my contact at Fan-Tastic Vent and she informed me that the 7RPM replacement would work, but would move very slowly, it's…

view full answer...

Answer 4

The Replacement Lift Motor for Fan-Tastic Vent B Series Roof Vents with Powered Lifts made before 2014 are no longer available. If you have a vent made in 2014 or after, then you will use #FVK6010-81 which has a 17-rpm rate instead of the 7-rpm rate…

view full answer...

Answer 5

You can use your existing supply line with the metal nut on your Dometic 300 Weekender #DOM64FR. However, you want to be careful since it is easy to cross thread when you have a metal nut which will damage the fitting. If you want to get a supply…

view full answer...

Answer 6

I have attached for you below a few wiring diagrams for the Dometic DV4100 Roof Vent Fan which I have received from the manufacturer directly.

view full answer...

Answer 7

If your Fan-Tastic B-Series Vent is equipped with a 17-rpm motor and was manufactured in or after 2014 then the Replacement Lift Motor #FVK6010-81 that you referenced is indeed a direct replacement and will work perfectly. If your vent assembly…

view full answer...

Answer 8

We do have replacement lift motors available for a Fan-Tastic vent, but 2000 TS is not actually a model number. To find out which lift motor you need there should be a number 7 or 17 on the actual motor, which is the RPMs of that motor. If the motor…

view full answer...

Answer 9

I could not locate that specific motor number for anything that we have. If you can provide me with the model number of the fan that you have, that would help me ensure that you get the correct replacement motor. However, the Replacement 17-rpm Lift…

view full answer...

Answer 10

You'll just need to run to your local hardware store and grab a supply line to connect your Dometic 310 Part-Timer RV Toilet #DOM37FR to your water inlet. I had to do the same in the attached video below when the new toilet I was installing had…

view full answer...

Answer 11

The Dometic RV toilets like the part #DOM29FR that you referenced use the standard 1/2 inch thread size for the supply line like most toilets do.

view full answer...

Answer 12

Yes, either the Replacement 17-rpm Lift Motor for Fan-Tastic Vent B Series Roof Vents with Powered Lifts #FVK6010-81 or the Replacement 17-rpm Lift Motor for Fan-Tastic Vent B Series Roof Vents with Powered Lifts #FVK6010-80 will work great as a…

view full answer...

Can Replacement 17-rpm Lift Motor for Fan-Tastic Vent Be Manually Operated

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching