EcoHitch Trailer Hitch that Fits 2023 Chevy Bolt EV

Question

Question:

Will this receiver fit on a 2023 Chevy Bolt EV even though it states that it is unconfirmed. Part# TL84CR

asked by: Jesse H

0

Expert Reply:

EcoHitch has a hitch that fits your 2023 Chevy Bolt EV with the part # 306-X7359 but the # TL84CR actually fits the EUV models instead.

expert reply by: Jameson C

0

Answer 1

The best hitch for your 2023 Chevrolet Bolt EUV is going to be the Curt Trailer Hitch Receiver item #C38DR. This hitch is custom fit and bolts to your Chevy with included hardware. I really like the Curt hitch because it installs behind your rear…

view full answer...

Answer 2

Yes, the EcoHitch Trailer Hitch Receiver #TL84CR for your 2022 Chevy Bolt EUV is the Stealth with the removable receiver. A lot of people like it because they want to retain the OEM look for their vehicles, and like the fact it mitigates any…

view full answer...

Answer 3

We have two hitches available for the 2023 Chevy Bolt EUV. The Curt Trailer Hitch item #C38DR weighs 29 lbs. The EcoHitch Stealth Trailer Hitch item #TL84CR weighs 52 lbs. The EcoHitch has a 3,000 lbs towing capacity over the Curt hitches 2,000…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 12

The main difference between a Class III hitch and a Class IV hitch is the capacities they set for the hitches. Class III hitches are rated for up to 6,000 lbs GTW with 600 lbs TW whereas a Class IV is rated for up to 12,000 lbs GTW and 1,000 TW. For…

view full answer...

EcoHitch Trailer Hitch that Fits 2023 Chevy Bolt EV

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching