Parts Needed to Add Wiring to 2018 Dodge Durango Towing Horse Trailer

Question

Question:

I have a 2018 Dodge Durango and need to add the connections for a horse trailer. It already has a hitch but no light or brake controls. Can you help me get the right product?

asked by: Karla K

1

Helpful Expert Reply:

In order to power the lights and brakes on your horse trailer you will need to add a 7-way to your 2018 Dodge Durango. The first thing I would do is see if you have the factory tow package connector behind the rear bumper. I have attached an installation video below for the Hopkins 7- and 4-Pole Trailer Connector Socket # HM40975. If you start watching at the 2 minute mark you will see the connector I'm referring to. If you have this connector then you will be able to use the # HM40975 and that is all that will be required.

If you do not have the factory tow package connector you will have to start by adding a 4-way with the Tekonsha T-One Vehicle Wiring Harness # 118617. This plugs into the connection points behind your tail lights. Once that is complete, you need to install the Universal Installation Kit for Trailer Brake Controller # ETBC7. This kit comes with the adapter, breakers, wiring, and everything else needed to upgrade your 4-way to a 7-way.

For a brake controller I recommend the Redarc Tow-Pro Liberty # RED24FR. The main unit of this brake controller mounts behind the dash with only the control knob visible in the cab. This keeps it out of the way and also gives it a nice clean OEM look in your vehicle. If you have the tow package there will be a connector under the dash which will allow you to use the custom fit wiring harness # RED77FR for installation. If you don't have the tow package and install the # ETBC7 for your 7-way then you will need the # RED69FR for installation.

expert reply by: Robin H

1

Answer 1

To install a p3 brake controller part #90195 in a 2015 Dodge Durango you'd need to use the part #TK93VR which plugs into the port under the dash of your vehicle without requiring additional wiring. If you check out the install video I…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 5

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...

Answer 8

We can definitely get you set up. For a 7-way wiring harness for your 2024 Honda Pilot trailsport I recommend the Curt T-Connector #C35ZV which will plug in to the existing tow package connector at the rear your vehicle. I do also recommend getting…

view full answer...

Answer 9

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 10

For your 2024 Hyunda Santa Cruz we have the Curt 7-way kit part #C68JR that is a confirmed fit. This installs by plugging into a factory wiring connector on your vehicle which means a really easy install that doesn't require any splicing.

view full answer...

Answer 11

The main difference between a Class III hitch and a Class IV hitch is the capacities they set for the hitches. Class III hitches are rated for up to 6,000 lbs GTW with 600 lbs TW whereas a Class IV is rated for up to 12,000 lbs GTW and 1,000 TW. For…

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Parts Needed to Add Wiring to 2018 Dodge Durango Towing Horse Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching