Can 5-Spoke Utility Hub Be Replaced with Hub with Standard Bolt Pattern

Question

Question:

Can a 5 lug Dayton style hub be replaced with a modern 5 lug rim? on both an axle with brakes and one without brakes. I want to put larger tires on a dual axle trailer. the tire size is 205/85D14.5 now. I have 6 inch between tires how much bigger can I go to be safe and not have to move the leaf spring brackets

asked by: Tim

1

Helpful Expert Reply:

We have some hubs that can replace the 5-Spoke utility-style you're currently using, but they use a 6 lug pattern which actually works out because you'll need to replace your wheels for your tires anyways. To increase your tire size I recommend a 235/80-16 tire (which reduces your clearance by 2" altogether) so for a complete set of parts you'll need the following:

- Trailer Idler Hub Assembly # AKIHUB-655-6-K
- Trailer Hub and Drum Assembly # AKHD-655-6-K
- 10-10 Grease or Oil Double-Lip Seals # RG06-090 (per axle)
- 12" Electric Brake Kit # AKEBRK-6
- Provider ST235/80R16 Radial Trailer Tire w/ 16" White Mod Wheel # TA39VR

expert reply by: Jon G

1

Dayton 5-Spoke Utility Hub
(click to enlarge)

Answer 1

We offer 15" diameter wheels in five different bolt patterns; 4 on 9.44" (uncommon), 5 on 4-1/2" (common), 5 on 4-3/4" (uncommon), 5 on 5" (semi-common), and 6 on 5-1/2" (common). In order to…

view full answer...

Answer 2

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 3

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 6

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 7

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 8

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 9

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 10

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 11

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 12

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Can 5-Spoke Utility Hub Be Replaced with Hub with Standard Bolt Pattern

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching