Replacing Hubs And Brake Assemblies On A 2014 Keystone Cougar 31SQB

Question

Question:

Hi- looking for a hub with included brake for 2014 keystone cougar. Can’t find my model 31sqb listed. Thanks

asked by: Craig L

0

Expert Reply:

I can definitely help and point you in the right direction. I was able to look up some specs on your 2014 Keystone Cougar 31SQB Travel Trailer. Based on what I can see, this trailer uses a pair of 4,400 lb axles. So in that case the replacement hub will be # 8-407-5UC3-EZ and the electric brake assemblies are part # K23-478-479. This is a 10" x2-1/4" brake assembly and a 6 lug hub. The hub uses a # L68149 inner bearing and a #LM67048 outer bearing. I recommend if possible pulling the bearings out of one hub to confirm the bearing sizes/ numbers.

That being said, the axles sizes and hubs are not always year, make and model specific. I recommend verifying these specs before you order. If you can find a tag on the axle that would be very helpful in narrowing it down. You could always contact a Keystone dealership with your VIN and they should be able to verify specs for you.

expert reply by: Jesse M

0

Answer 1

Hey Richard, thanks for reaching out! The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 is a great option for a replacement actuator because it's a direct replacement for the common Model 60 actuators that were popular in the…

view full answer...

Answer 2

Based on the GVWR of your 2019 Jayco North Point 315RLTS it does seem like you have 7k axles. I recommend verifying this information to be sure. These axles typically use the #14125A outer and #25580 inner bearing found in the Timken #TMK92VR.…

view full answer...

Answer 3

I'd be happy to help you out, John! To replace the brakes on your 5th wheel trailer you need the etrailer Electric Trailer Brakes #AKEBRK-7-SA which come with a self-adjusting feature so once you initially set them up you won't have…

view full answer...

Answer 4

Thanks for the information on your trailer. For your axle with brakes I recommend the Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb E-Z Lube Axles - 12" - 6 on 5-1/2 #AKHD-655-6-EZ-K if you have the spindles with the integrated…

view full answer...

Answer 5

The inner diameters of the LM67048 and 15123 both are the same (1.250 inches). That means that a hub with either bearing in the outer bearing would fit your spindle. The part #AKHD-655-6-EZ-K would fit your axle.

view full answer...

Answer 6

You shouldn't really have any play with the Easy Grease Trailer Hub and Drum Assembly #AKHD-655-6-EZ-K. If you are getting play in it then the bearings most likely are either not set correctly or were the incorrect choice for your…

view full answer...

Answer 7

The Dexter Trailer Hub and Drum Assembly #K08-201-9B does include the standard and E-Z lube grease caps. What you see in the product images and review video is what you get.

view full answer...

Answer 8

The only differences between the two hubs you mentioned #8-201-9UC3-EZ and #8-201-5UC3-EZ are that the 8-201-5UC3-EZ is not pre-greased and the other is and they have different bearing between the two. But the bearings both have the same inner…

view full answer...

Replacing Hubs And Brake Assemblies On A 2014 Keystone Cougar 31SQB

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching