Is There Replacement Converter for an RV that Works with Lithium and Lead Acid Battery

Question

Question:

I have a 2007 20 foot Airstream. I suspect my converter is failing because my lights flicker when hooked to 120 volt power. No flicker on batteries only. Currently we have two new AGM batteries so I want something that charges them, but in the future might be able to charge lithium. Im assuming the converter is located underneath the fuse panel in the trailer. What is the best replacement converter that requires minimal work/knowledge to install? Thanks,

asked by: Keith L

0

Expert Reply:

All of the converters we offer are either a lead acid battery type or a lithium battery type. So if currently you are using a lead acid batteries you'd need something like the part # PD9180A for an 80 amp converter or the # PD9180ALV for a lithium.

The install of these is pretty simple and wouldn't take an electrician but you'd just want to follow the instructions and you'll be fine.

expert reply by: Jameson C

0

Answer 1

I confirmed with my tech at Progressive Dynamics that the Inteli-Power RV Converter and Battery Charger - Lithium #PD9160ALV has the same wiring setup as the Inteli-Power RV Converter and Smart Battery Charger #PD9260C. As far as upgrading to the…

view full answer...

Answer 2

For a similar 60 amp converter that can charge a lithium battery you'd want the part #PD9160ALV but the part #PD9260C can only charge lead acid batteries.

view full answer...

Answer 3

For a similar 60 amp converter that can charge a lithium battery you'd want the part #PD9160ALV but the part #PD9260C can only charge lead acid batteries. There isn't a way to convert what you have to work with lithium batteries.

view full answer...

Answer 4

I really wish there was a great solution but nothing we have works mainly because of the number of bikes. E-bike racks are primarily 2 bike racks and when you have to limit them to 5th wheel applications that makes it really hard. If for some reason…

view full answer...

Answer 5

The difference between the two models that you were researching is that the #PD9160A is designed for use with lead acid batteries and the #PD9160ALV is designed for use with lithium batteries. Choosing the incorrect battery profile can lead to issues…

view full answer...

Answer 6

The Progressive Dynamics Replacement Section #PD4655V does have a jumper to change the charging profile to lithium compatible. You'll simply need to move the black jumper over from the WIZ side to the LI side.

view full answer...

Answer 7

To change the battery mode on the Progressive Dynamics 9300 Series RV Converter Charger #PD79RR you'll need to insert the included CLAW tool into the small opening next to the battery type indicator light. Press and hold that button (using the…

view full answer...

Answer 8

Yes, the Progressive Dynamics part #PD9260C will work great as a replacement for the Magnetek 900 series model 950 that you have currently.

view full answer...

Answer 9

Hey Dave, for a 60 amp charger the 6-gauge wire that you have currently is not going to cut it. You will want to use 4-gauge copper wire for your 15' run when using the Progressive Dynamics PD9200 Series Battery Converter Charger #PD9260C. For a…

view full answer...

Answer 10

Great question Larry, so the current version of the Progressive Dynamics converter #PD4655V does support lithium batteries as-is. At one point it did not but since lithium batteries have become more popular Progressive Dynamics decided to make this…

view full answer...

Answer 11

Hey Bobby, You will want to use either solid or stranded copper wire between 2 and 14AWG for the positive and negative connections to the battery. The gauge will depend on the length of your run from the Progressive Dynamics PD9200 Series Battery…

view full answer...

Answer 12

Hey Craig, It sounds like you are asking if you can use the Progressive Dynamics converter #PD69RR to charge a battery that has a 3 panel solar panel setup also charging it. The answer to that is yes you can.

view full answer...