Replacement Hub for UFP Hub H-1062-3
Question:
I need a 5 lug hub for my jetski trailer. I found “ H1062” on the back.
asked by: Joshua B
Expert Reply:
The UFP hub that you've referenced isn't made any longer I don't believe, but we do have some options for you. From some previous customers, we've determined that the UFP H-1062-3 axle has a spindle that has # L44649 inner and outer bearings, and a grease seal that has a 1.979" OD and a 1.372" ID
You will need to choose the hub based off those bearings and the bolt pattern of the hub for your wheels, but the most likely option is the Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 # 8-258-5UC1. It comes with the # L44649 bearings but the grease seal is incorrect. You will simply need to purchase the Grease Seal Set # 13194 in addition and use it instead of the supplied grease seal
Products Referenced in This Question
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.4 Inch I.D.
- 1.983 Inch O.D.
- Redline
more information >
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Replacement Trailer Hub Bearing - L44649
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Shop: Grease Seal
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Trailer Hitch
- Article: Most Popular Wheel Bearings
- Search Results: 44649
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Video: etrailer Electric Trailer Brake Kit Installation
- Shop: Grease Seals 10-36 (pair)
- Q&A: Hub And Drum Replacement for 90865 Rockwell Hub and Drum
- Search Results: 25580
- Shop: Gooseneck Hitch
- Article: Trailer Tire Sizing
- Search Results: 68149
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Video: etrailer Trailer Idler Hub Assembly Installation
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: etrailer Trailer Idler Hub Assembly Review and Installation
- Shop: Brake Controller
- Search Results: l44649
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Fifth Wheel Hitch
- Video: Timbren Axle-Less Trailer Suspension System Installation
on Trailer Hubs and Drums
