Can Yakima Crossbars Be Cut Down and Reinstall End Caps

Question

Question:

Can the longer bars be cut to desired length and still use the end caps?

asked by: Mike

0

Expert Reply:

Yes, you could cut down the Yakima Crossbars part # Y00411 and reinstall the endcaps.

expert reply by: Jameson C

0

Answer 1

We can get your Ford Super Duty set up with a Yakima rack for your Diamondback SE tonneau cover. The Q Towers are no longer made and aren't compatible with Yakima's latest racks, so you'll need a new set of towers for the system. Here is…

view full answer...

Answer 2

The Timberline is actually the towers #Y33TR, so you will either have the CoreBar crossbars #Y00421 or the JetStream #Y00426. You can trim these bars to a shorter length and I do recommend using a new hack saw blade to do so. The aluminum crossbar…

view full answer...

Answer 3

I checked directly with Yakima, and the shortest crossbar size for the OverHaul HD ladder rack on a 2021 Ford F-150 is indeed the 68 inch bars, and they say the 60 inch bars will not fit as they are too short. So the correct fit for your '21…

view full answer...

Answer 4

If you had a hard freeze while the cover was wet and it's only had a little bit of time to unfreeze there could still be some ice build up that hasn't fully cleared to allow the locking mechanism to operate. If the truck wasn't sitting…

view full answer...

Answer 5

The replacement rail clamps #PE54CV for your Pace Edwards JackRabbit Retractable Hard Tonneau Cover #PE54UV on your 2010 Ford F-250, is not available separately from the kit. This kit does will work with the: -Bedlocker, -Bedlocker with Explorer…

view full answer...

Answer 6

It sounds like you may be looking for the Replacement Rail Clamps for Pace Edwards Retractable Hard Tonneau Cover #PE54CV. This kit contains everything you need to replace your rail clamps on your Pace Edwards JackRabbit Tonneau Cover, however with…

view full answer...

Answer 7

Yakima round bars like the round bars #Y00411 have a weight capacity of 165 lbs as a pair.

view full answer...

Answer 8

You can definitely use the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack with 68" HD Bars #Y01151-58 for your 2021 Ford F-150, but I don't recommend going with 60". I think you'll be cutting it a little too close plus you want…

view full answer...

Answer 9

The Round 78 Inch CrossBars for Yakima Roof-Rack System #Y00411 referenced in your question do not come with the end caps, but they can be added with part #Y8007026. This will include all 4 end caps needed for the two load bars.

view full answer...

Answer 10

The maximum static weight capacity for the Yakima HD Crossbars #Y01156 along with the Timberline Towers #Y33TR on your 2022 Subaru Outback Wagon is rated at 500 pounds. This weight limit is the maximum weight limit for each of the components. To have…

view full answer...

Answer 11

I recommend the Pace Edwards JackRabbit Retractable Hard Tonneau Cover #PE54UV for your 2022 Chevrolet Silverado 3500 Dually with the 8' Bed. This cover can be locked in 1' intervals allowing you to still protect your cargo and bed when you…

view full answer...

Answer 12

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Can Yakima Crossbars Be Cut Down and Reinstall End Caps

Product Page this Question was Asked From

Continue Researching