Taller Lug Nut to Use with Kenda Karrier S-Trail ST145/R12

Question

Question:

Kenda Karrier S-Trail ST145/R12 Radial Tire w/ 12inch Aluminum Wheel - 5 on 4-1/2 - Load Range E. Just discovered that my lug nuts do not work with a standard wrench due to their recessed position in this wheel- they are deeply recessed and I can not get to them - What model of lug nuts do you recommend in your ranger - and you might want to advise peopl coming from steel wheels that they need to buy longer ? lug nuts- looks like I am not the first one with that issue...

asked by: Philippe

0

Expert Reply:

You will need to go with an acorn style lug nut that is taller like the part # AM90049 to mount the trailer wheel part # AM31215 due to the smaller diameter of the lug nut opening.

expert reply by: Jameson C

0

Answer 1

Yes, the CE Smith Trailer Wheel Lug Nut #CE11051 that you referenced is a 1/2 inch x 20 lug nut that uses the same standard cone angle of 60 degrees which vehicles use as well.

view full answer...

Answer 2

While we no longer carry the Lionshead Wildcat we do have the Castle Rock ST225/75R15 Radial Tire w/ 15" Liger Aluminum Wheel #LH29FR. If your trailer did not include a spare you could order 2 new wheels and tires so they match and use your…

view full answer...

Answer 3

For a black Lionshead wheel, we have the Aluminum Liger Trailer Wheel #LH49FR. These are 15" x 6" with a 6 on 5-1/2" lug pattern.

view full answer...

Answer 4

The correct size lug nut you need for your 2012 Classic Limited Trailer will depend on what type of wheel bolts you have on the trailer hubs. I recommend taking a few quick measurements on your existing lut nut and wheel bolt to verify the correct…

view full answer...

Answer 5

The SULY-150-600-6BMF is the same as our Black Aluminum Lynx Trailer Wheel LHSL311B which unfortunately went NLA (no longer available) back in May. You might be able to find it elsewhere but it might be difficult so I recommend swapping over to the…

view full answer...

Answer 6

The 1/2"-20 lug nut that I would recommend is the Kodiak Trailer Wheel Lug Nut #KALN1375S. The reason I recommend this lug nut is because it is a one piece, stainless steel design. So it is going to be the most durable and allow you to use…

view full answer...

Answer 7

That appears to be the Aluminum Eagle wheel from Lionshead. We currently only carry this wheel in an 8 lug 16" x 7". Our most similar wheel in a 15x6 is the Aluminum Liger Trailer Wheel #LH49FR. This is similar in design and color to your…

view full answer...

Answer 8

While I could not find any information with the wheel number you gave I do know Lionshead has discontinued a bunch of their wheels which is most likely why you cant find your wheel. We do have a similar Aluminum Lynx Trailer Wheel #274-000006 or…

view full answer...

Answer 9

We have the Aluminum Liger Trailer Wheel - 15" x 6" Rim - 6 on 5-1/2 #LH49FR in black. It is a very sharp looking wheel! The other colors are no longer available.

view full answer...

Answer 10

I do have an option for you but a lot of the Lionshead Aluminum Wheels are being discontinued like the Wildcat. The only wheels we have from Lionshead in this size are as follows: Liger (Black) part #LH49FR Liger (Gray) part #LH37FR Lynx part…

view full answer...

Answer 11

The Aluminum Lynx Trailer Wheel part #274-000006 for starters will require a long style acorn lug nut like the Lionshead Trailer Wheel Lug Nut part #LHLR110. The torque spec of these lugs nuts while used on that will be around 130 ft. lbs. to 150 ft.…

view full answer...

Answer 12

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Taller Lug Nut to Use with Kenda Karrier S-Trail ST145/R12

Products Referenced in This Question

Continue Researching