Availability Of Mounting Hardware For Buyers 45 Ton PIntle Hook

Question

Question:

Do you offer mounting hardware for the 45 Ton Pintle hook?

asked by: Jason M

0

Expert Reply:

We do carry the hardware kit # 3378530 which will fit the buyers Pintle hook # 337PH45 that you were looking at. The bolts technically are made for the buyers 30 ton pintle hook like part # 337PH30. They will fit the 45 ton just fine. These are the strongest bolts that we carry for these pintle hooks.

expert reply by: Jesse M

0

Answer 1

The mounting kit that is recommended for use with the 60k Buyers Products Pintle Hook part #337PH30 is the part #3378530 but this is only the hardware to mount the hook and does not include a plate. The hook has a capacity that's higher than any…

view full answer...

Answer 2

Grade 8 bolts are recommended for installing the Buyers Products 3" I.D. Heavy-Duty Forged 4-Bolt Mount Lunette Ring #337BDB1394 that you referenced. We actually have a mounting kit for this with part #3378530 that includes the bolts. Then for a…

view full answer...

Answer 3

We sell a bolt kit for the #337PM25812 which comes with the correct size bolts and hardware as part #3378525 actually which includes bolts that are are 9/16 inch in diameter and 2-1/2 inches long.

view full answer...

Answer 4

The weight capacity of the Ram Gooseneck Coupler part #GCPN-30008 is 30,000 lbs of gross trailer weight and 3,000 lbs of tongue weight.

view full answer...

Answer 5

The mounting holes are 4-1/2 inches apart on center for the Buyers Products 3" I.D. Heavy-Duty Forged 4-Bolt Mount Lunette Ring #337BDB1394.

view full answer...

Answer 6

The Buyers Products 30 Ton Pintle Hook part #337PH30 is designed for a lunette ring that has a 2-3/8" to 3" inner diameter with 1-3/8" to 1-5/8" diameter section such as the Buyers Products Heavy-Duty Forged 4-Bolt Mount Lunette…

view full answer...

Answer 7

Lunette rings do come in more than one size. The linked page displays both 2-1/2-inch and 3-inch inner diameter. . Lunette ring accessory items are also shown on the other linked page. Weight capacities for lunette rings are substantial, ranging from…

view full answer...

Answer 8

I called my contact at Buyers Products and they informed me that the Buyers Products Welded Mount Lunette Ring part #337BDB125015W is 5-1/2" x 5-1/2" and the mounting holes are all 4-1/2" apart top to bottom and side to side. I have…

view full answer...

Answer 9

The Buyers Products 45 Ton Pintle Hook #337PH45 does not have the 4 inch square bolt pattern but rather uses a different pattern. Vertically the holes are 3 inches on center. Horizontally the top row is 5-1/4 inches on center and the bottom is 6-1/2…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

I spoke to Dexter and they said there is a bit of a process for installing the spindle nut properly. 1. You will need to thread on the inner nut, rotate the hub, then tighten the nut to 100 foot pounds. 2. Loosen the nut to remove the torque, making…

view full answer...