Landing Gear Fitment on 2021 Forest River XLR Nitro 35141 5th Wheel Toy Hauler

Question

Question:

I have a 2021 XLR Nitro 35141 ft 5th wheel, will the MORryde MR72ar fit my toyhauler? I measured between my jacks and it is 81 inches.

asked by: Allan S

0

Expert Reply:

Since the MORryde 5th Wheel Cross Brace Landing Gear Stabilizer # MR72AR fully extends up to 80" and the distance between your landing gear jacks is 81" I don't see this kit fitting your application unfortunately.

Instead you might consider the MORryde Hitch Mounted Stabilizer for 2" Trailer Hitches # MR22AR or the JT's Strong Arm Jack Stabilizer Kit # LC191023 which doesn't have to stretch from landing jack leg to landing jack leg.

expert reply by: Jon G

0

Answer 1

The disc brake kit #K2HR712D that you referenced should work well for you. You would need a quantity of 2 of these for each of your axles. These have the same bolt pattern as your current setup and are rated a 7k. You can verify that these will fit…

view full answer...

Answer 2

When the MORryde 5th Wheel Cross Brace Landing Gear Stabilizer #MR72AR is fully extended it measures 80 inches so it would easily handle your 68 inch length requirement.

view full answer...

Answer 3

The other end of the JT's Strongarm part #LC191023 has a wider lug spacing to allow the #LC191023 to install into. You are trying to install the kit on the end that is narrower.

view full answer...

Answer 4

The JT's Strong Arm Stabilizer Kit #LC191023 paired with the either #LC314597 to adapt it to electric jacks, or #LC314592 to adapt it to hydraulic jacks, can be used with auto leveling jacks without issue. I spoke to MORryde and the #MR72AR said…

view full answer...

Answer 5

It sounds like you're looking for the MORryde 5th Wheel Cross Brace Landing Gear Stabilizer #MR72AR. These bars will permanently attach to your 5th wheels landing gear legs to reduce movement while parked, and when the landing gear is retracted,…

view full answer...

Answer 6

I went out to the warehouse to measure the length of the arms when extended for the JT's Strong Arm Jack Stabilizer Kit #LC191023. From the center of the hole on one end to the center of the hole on the other end it measures 46 inches extended.…

view full answer...

Answer 7

I recommend the MORryde 5th Wheel Cross Brace Landing Gear Stabilizer, #MR72AR that permanently attaches to your fifth wheel's landing gear reducing movement while parked. After installation, the braces will extend and retract with your landing…

view full answer...

Answer 8

Can you send me a picture of the feet of your jacks? How far apart are they?

view full answer...

Answer 9

Since you have 85-1/2" between the legs of your landing gear the correct JT's Strong Arm Jack Stabilizer Kit is #LC191023. Prices do fluctuate so you can find the current price on the linked product page.

view full answer...

Answer 10

For attaching the JT's Strong Arm Jack Stabilizer Kit #LC191023 to front landing gear the needed brackets are included. I attached a picture that shows how these install to landing gear jacks on the front of a trailer as well as an install video…

view full answer...

Answer 11

The placement for the rear stabilizer from the JT's Strong Arm Jack Stabilizer Kit #LC191023 can vary from camper to camper as they are not always the exact same sub structure under the frame. I have linked a copy of the installation instruction…

view full answer...

Answer 12

Yes, the MORryde 5th Wheel Cross Brace Landing Gear Stabilizer item #MR72AR is universal and will fit your 2022 Grand Design Reflection 150 295rl so long as your landing gear is between 58"-80" wide.

view full answer...

Landing Gear Fitment on 2021 Forest River XLR Nitro 35141 5th Wheel Toy Hauler

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching