What is Max Length of MORryde 5th Wheel Cross Brace

Question

Question:

Hi there, I have a 2004 Flagstaff 8528RLSS 30foot 5th wheel that I back up my angled driveway. When I park like this, I need to extend my landing gear quite far to level the 5th wheel, since the driveway slopes down towards the front. I am measuring about 68inch between the bottom of one leg and the top of the other in this situation. Can you tell me if your MR72AR stabilizer bars extend long enough to cover a span this long, ideally allowing at least 70? Thanks,

asked by: Dean J

0

Expert Reply:

When the MORryde 5th Wheel Cross Brace Landing Gear Stabilizer # MR72AR is fully extended it measures 80 inches so it would easily handle your 68 inch length requirement.

expert reply by: Jameson C

0

Answer 1

The JT's Strong Arm Stabilizer Kit #LC191023 paired with the either #LC314597 to adapt it to electric jacks, or #LC314592 to adapt it to hydraulic jacks, can be used with auto leveling jacks without issue. I spoke to MORryde and the #MR72AR…

view full answer...

Answer 2

It sounds like you're looking for the MORryde 5th Wheel Cross Brace Landing Gear Stabilizer #MR72AR. These bars will permanently attach to your 5th wheels landing gear legs to reduce movement while parked, and when the landing gear is…

view full answer...

Answer 3

Yes, the MORryde 5th Wheel Cross Brace Landing Gear Stabilizer item #MR72AR is universal and will fit your 2022 Grand Design Reflection 150 295rl so long as your landing gear is between 58"-80" wide.

view full answer...

Answer 4

Yes, the jack leg part #LC241846 that you referenced does measure 2-1/2 inch by 2-1/2 inch.

view full answer...

Answer 5

We have the Replacement Heavy Duty Landing Gear Master Leg for Lippert Components Landing Gear #LC241846. This is a direct replacement for your system now that Lippert has bought out Atwood. This will simply bolt into place using your already…

view full answer...

Answer 6

I have a solution for you and just as an FYI, Lippert had some difficulties with manufacturing and materials procurement during the pandemic; the Heavy Duty Driver Leg for Lippert Ground Control 2.0 Landing Gear #LC241846 was one of their parts that…

view full answer...

Answer 7

The Replacement Heavy-Duty Landing Gear Jack Leg for Ground Control 2.0 - Extended #LC241845 is a replacement for the Heavy-Duty Landing Gear Jack Leg for Ground Control 2.0 and will work on either side.

view full answer...

Answer 8

The Lippert part number you referenced is for the Ground Control 2.0 system which you'd have to use the part #LC241845 as a replacement for. There isn't a Stromberg part number that will work.

view full answer...

Answer 9

It sounds like your Venture landing gear is not working properly on the lead leg. I recommend the Lippert Components Venture Lead Leg Repair Kit for 5th Wheel RV Landing Gear #LC146059 if you want to fix the internal gears. If you are looking for the…

view full answer...

Answer 10

I believe you are asking about the weld stops on the Replacement Heavy Duty Landing Gear Master Leg #LC241846. As shown in the attached diagram, the distance from the top of the upper weld stop to the bottom of the lower one on #LC241846 is 17.5…

view full answer...

Answer 11

The Replacement Heavy Duty Landing Gear Master Leg for Lippert Components Landing Gear #LC241846 is what they were referring to. This is the lead leg replacement. If you need other parts let me know and I'd be happy to assist.

view full answer...

Answer 12

While we do have an option for you, MORryde has told us the MORryde 5th Wheel Cross Brace Landing Gear Stabilizer #MR72AR should not be used with auto leveling landing gear. So what you would need instead, that is confirmed to work with your electric…

view full answer...

What is Max Length of MORryde 5th Wheel Cross Brace

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching