Can Blaylock Door Lock be Ordered With Specific Key Number

Question

Question:

Is it possible to order a new BLDL-80 with a lock keyed to the same key as 2 other BLDL-80s that I ordered in 2020? I need a new one that matches the older ones. I have the key number for the older ones and can provide that older order number, if that helps.

asked by: Jeff S

0

Expert Reply:

I'm sorry but the Blaylock Door Lock for Enclosed Trailers # BLDL-80 cannot be ordered with a specific key number.

expert reply by: Kyle S

0

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

If a thief has the time and opportunity they usually get what they want. If a thief was dedicated enough to breaking into your trailer that he would go the lengths you described to defeat the #BLDL-80 he would probably also find other ways (much…

view full answer...

Answer 3

Yes, the #100019-24 pigtail can be used to connect your dual-cylinder 100 lb propane setup to the regulator on your RV. Since this hose does not have a back-check to contain a gas leak, you will need the #204120-MBS fitting that includes a…

view full answer...

Answer 4

The Dexter Electric Trailer Brake Kit #23-105-106 are a replacement set for the 023-358-00. This kit includes a right and left brake assembly that is manually adjustable. I recommend the Dexter Nev-R-Adjust Electric Trailer Brake Kit #23-458-459 as…

view full answer...

Answer 5

When our installers replace a trailer hub, there isn't a set torque spec used when tightening the spindle nut. The hub is placed on the spindle, making sure the inner and outer bearings are correctly seated. The spindle nut is then run down until…

view full answer...

Answer 6

The Oil Cap Kit #RG04-250 is designed for standard 10K - 12K axles and has 3-3/4" diameter threads. This should do the trick for you but I do recommend measuring the diameter of your oil cap first as I wasn't able to find anything related to…

view full answer...

Answer 7

I spoke with my contact at Dutton-Lainson and he stated that the 203960B number that you pulled from your jack is a label number. That label was used on two different trailer jacks with a 1250 lb weight capacity, sidewind jack #6814 and topwind jack…

view full answer...

Can Blaylock Door Lock be Ordered With Specific Key Number

Product Page this Question was Asked From

Continue Researching