Should the Curt Trailer Hitch Receiver # C38JR Come With Installation Hardware

Question

Question:

Does Item # C38JR come with the mounting hardware? I bought the itch from Amazon and it didnt come with it

asked by: Chris W

0

Expert Reply:

Yes, the Curt Trailer Hitch Receiver # C38JR should come with the installation hardware. I verified this with the manufacturer.

We do have replacement hardware available for hitches with part # RHK. You would just need to put C38JR in the "Hitch Item Number" box. This would be the entire hardware kit (carriage bolts, flange nuts and spacers).

expert reply by: Scott S

0

Answer 1

Certainly; I have added a cutout for you showing the fascia trimming needed on your 2024 Volkswagen Taos to install the Curt hitch that fits. I verified with the manufacturer for you the correct part number is the following: - Curt Trailer Hitch…

view full answer...

Answer 2

Thank you for your purchase of the Curt Trailer Hitch Receiver #C38JR for your 2022 Volkswagen Taos! From what I'm seeing in the photo you sent in it looks like the bracket(s) on your hitch got bent a little during shipping. This isn't super…

view full answer...

Answer 3

Per Curt, the Curt Trailer Hitch Receiver #C38JR is a compatible fit for all models of the 2022 Volkswagen Taos. You shouldn't have to remove the rear fascia or drill into anything but you'll likely need to trim the underbody panel if it…

view full answer...

Answer 4

For your your AWD 2022 Volkswagen Taos, the correct fit is the Curt Trailer Hitch Receiver #C38JR.

view full answer...

Answer 5

When it comes to installing a trailer hitch on your 2022 Volkswagen Taos AWD The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2 inch #C38JR is confirmed to fit your vehicle. The trailer hitch has a bolt-on installation with no welding…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 10

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 11

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 12

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Should the Curt Trailer Hitch Receiver # C38JR Come With Installation Hardware

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching