Will Jounce-Style Springs Fit a 2021 Ford Ranger with Tremor Package

Question

Question:

Will this product fit the Tremor Ranger?

asked by: Richard J

0

Expert Reply:

According to my research the SumoSprings Solo Custom Helper Springs # SS76MR will fit with the Tremor package on your 2021 Ford Ranger, but the Tremor model sits about 1" taller than the standard Ford Ranger so the SumoSprings may not end up engaging like they should.

Since this is the case I recommend going with the Timbren Active Off-Road Bumpstops # T98FR instead and using the 1" Spacer # A25723-90AH00 to help take up that extra space, but you will need to pick up a longer M10 bolt to be able to install the kit with the 1" spacer.

expert reply by: Jon G

0

Answer 1

I checked with Timbren, the Timbren Rear Suspension Enhancement System part #TFRRGR is a confirmed fit for a 2023 Ford Ranger with Tremor Package. These feature a simple bolt-on install without any drilling required. They will do a great job of…

view full answer...

Answer 2

A simple set of suspension enhancements should help tremendously with bounce while towing with a 2021 Ford Ranger. I recommend the SumoSprings Solo Custom Helper Springs part #SS76MR which provides a bit of cushion as well as support without…

view full answer...

Answer 3

Since the only difference between the SumoSprings Solo Custom Helper Springs #SS76MR and #SS86MR is the weight rating (the former being 1,000 lbs and the latter being 1,500 lbs) I recommend going with the lighter option - part #SS76MR. It would be…

view full answer...

Answer 4

According to the folks at SuperSprings, the manufacturer of SumoSprings, the Rebel #SSR-129-40-2 IS compatible with the Tremor Package, as long as your truck does NOT have the 3 inch blocks on top of the overload springs. If you have the 1 inch…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

Personally I wouldn't go with Timbren's for your needs. They're essentially rubber bump stops that prevent your suspension from flexing when weights placed on the rear of your Canyon. The major issue with them is comfortability when you…

view full answer...

Answer 12

Yes we do have a set of Timbrens that fit your 2024 Toyota Tundra with the part #T45MR. These can give you up to an additional 6,000 lbs of suspension support.

view full answer...