Wire Functions of 4-Way For Wiring Harness 118727

Question

Question:

what are the wire labels for the 118727 4 pole wires? I am wiring to a USCAR 56229 7-wire connector no reverse lights or power brakes

asked by: Bruce R

1

Helpful Expert Reply:

On the 4-way of the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118727 are the green is right turn and brakes, the yellow is left turn and brakes, the brown is tail lights and the white is ground.

expert reply by: Kyle S

1

Answer 1

If you want to install the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13182 on your 2016 Jeep Grand Cherokee, you will use M14 bolts that are grade 5 as well as compatible flat washers. That is the replacement for what is…

view full answer...

Answer 2

Yes, the Curt #C13065 will fit your 2016 Jeep Grand Cherokee Summit. This fits all models except the SRT, SRT8, TrackHawk, and diesel. The hitch features a concealed cross tube, bolt-on installation, and comes with a limited lifetime warranty. If you…

view full answer...

Answer 3

I recommend the Tekonsha T-One Vehicle Wiring Harness, #118727 for your 2021 Jeep Grand Cherokee. This custom-fit T-One connector simply plugs into your vehicle's OEM wiring harness that is located behind the tail lights. Then run a hot lead up…

view full answer...

Answer 4

For your 2021 Jeep Grand Cherokee Laredo X I recommend using the etrailer Trailer Hitch Receiver #e98901. This receiver will fit below the stock fascia and does not require any cutouts or replacement fascia's to be installed. I have linked an…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 11

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Wire Functions of 4-Way For Wiring Harness 118727

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching