Types Of Sealant Needed For Various Sealing Needs On A Trailer

Question

Question:

What is you recommended sealer for cargo trailer roofs, under body joints, and for roof vent install?

asked by: Jesse A

0

Expert Reply:

For anything vertical that you're trying to seal or if you're under the trailer sealing and don't want the sealant to drip down you'll need Non-Sag Sealant for RVs # 344270341437-1. For anything on top of the trailer that you need to seal, like a roof vent, you'll want Self-Leveling Sealant # 34427034145-1 since it will spread out a bit and provide better coverage.

expert reply by: Kevin C

0

Answer 1

Not a saint, but I should still be able to help you out! I believe you are asking about a standard square roof vent on your trailer, and you really just need to know two things - the size of the cut out of the vent opening and the (approximate) depth…

view full answer...

Answer 2

The diameter of a 275/80R-22.5 tire is normally around 39-3/4 inches so you need a tire cover that fits 40 inch tires. A good option for a 40 inch spare tire cover is Camco part #CAM45251 in black. The Camco tire covers are designed with an UV…

view full answer...

Answer 3

For the Ventline E-Z Lift Ventadome Trailer Roof Vent #V3092-601-00, I recommend the MaxxAir Standard RV and Trailer Roof Vent Cover - 19" x 18-1/2" x 9-1/2" - White #MA00-933066. This cover will allow for full vent function and also…

view full answer...

Answer 4

The shortest garnish pieces that will fit the Ventline E-Z Lift Ventadome Trailer Roof Vent #V3092-601-00 have a 1-1/8" leg. These come in Birch White #VA0445-25 and Polar White #VA0445-33. i have attached a review video for you to reference.

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

With the weight of your camper I recommend the Air Lift LoadLifter 5000 Ultimate Air Helper Springs #AL35FJ. I prefer these as they have the internal jounce bumper which helps to reduce the bounce that is often associated with towing a trailer and…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

The best air bag kit for your 2022 Ford F-350 that has a single rear wheel axle is the part #F95FV which has the 5,000 lb capacity you are wanting. Firestone bags are superior Air Lift bags. The ply rating of the rubber is higher, the attachment to…

view full answer...

Answer 10

Yes, you can replace your current Lippert Equa-Flex equalizers with the MORryde AllTrek 4000 Equalizers #MR29DR on your 2018 Highland Open Range. The yellow octagons on the front and rear are a for correcting the alignment of the axles and are not…

view full answer...

Answer 11

The Thule TracRac CapRac Ladder Rack for Camper Shell/Truck Cap #TH29200XT is not actually meant to be installed into top tracks. This crossbar system is actually meant to be installed in fixed points on your camper shell so it's not going to…

view full answer...