Availability of Gooseneck-to-5th Wheel Adapter for 1996 Ford F-350 With Long Bed

Question

Question:

Looking at Gooseneck to 5th wheel notice all say for flatbed does it work with f350 pickup regular 8ft bed

asked by: James D

0

Expert Reply:

The Demco # DM8550046 you looked at is designed for a flatbed with a recessed ball. However, you can use the Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter # DM8550045. This is compatible with any truck that has a standard gooseneck hitch, including your F-350. It works with gooseneck balls up to 5" tall and has a gross towing weight of 21,000 lbs.

expert reply by: Robin H

0

Answer 1

The base on the #DM8550045 is completely different from the #DM8550046 so you can't simply add on the adapter for the recessed ball. However, you can swap out the base with #DM6316 and use your existing head which will save money over replacing…

view full answer...

Answer 2

Your 4 inch tall gooseneck hitch ball is 100 percent compatible with the gooseneck adapter you asked about from Demco, which is the following part: - Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter #DM8550045 This adapter will fit hitch…

view full answer...

Answer 3

Hi Rick, The Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #GY86GR could potentially work but you'll need the correct gooseneck to fifth wheel hitch adapter or you'll want to switch to a gooseneck pin box like #GY98GR. The #GY86GR is designed…

view full answer...

Answer 4

Hey Colin, thanks for reaching out! The Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter for Recessed Ball #DM8550046 (which uses the 6316 base) will work just fine with your 2018 Keystone Cougar 368MBI as long as it doesn't have a…

view full answer...

Answer 5

Good morning, Kyle. The Furrion Vision S Cameras cannot be made to send signal to a Kenwood aftermarket rear camera display. The Furrion cameras are only compatible with the Furrion brand monitors. So, if you are in need of a new camera, I suggest…

view full answer...

Answer 6

So the number GH-8045AL you are seeing is the Gen-Y part number for our #GY58GR. So everything is okay with that. As far as the height and the mounting holes it can vary so much from camper and vehicle that I always say it is best to just ensure you…

view full answer...

Answer 7

Hey Bruce, while the Gen-Y fifth wheel to gooseneck adapter part #GY58GR doesn't provide additional turning clearance the tapered nose of your 2022 Grand Design Solitude 280RK with the "longer" short bed both of your trucks have would…

view full answer...

Answer 8

Yes, the Curt CrossWing Lightweight Gooseneck-to-5th-Wheel Trailer Hitch Adapter #C32DR will work with the OEM puck system on your 2016 Ram 2500. Do understand since you do have the short bed you will likely not be able to make full jackknife turns…

view full answer...

Answer 9

I wouldn't attempt to put a rubber mat between the truck bed and the base of the Demco Recon hitch part #DM8550045 as that would diminish how much the bed supports the hitch by the base and would put more stress on the center post attachment.…

view full answer...

Answer 10

As you have a Coleman Mach system currently you can use the Furrion Chill AC units from the list below. These will simply replace only the rooftop units and the controls and thermostats you currently have in place with control the new AC's. 13.5K…

view full answer...

Availability of Gooseneck-to-5th Wheel Adapter for 1996 Ford F-350 With Long Bed

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching