Recommended Tie Down Anchor for a 3-1/2 Inch Wide Stake Pocket
Question:
Hello eTrailer, I need four 4 stake pocket D-ring s for my flatbed car trailer. Pocket dimensions are 3-1/2 inches tall, 3-1/2 inches wide, and 1-1/2 inches deep. I see several stake pocket D-ring s available on your website, but their listings do not provide complete dimensions to assure a correct fit. Can you help? Thank you.
asked by: John C
Expert Reply:
If the inner width of your flatbed trailer's stake pockets are 3-1/2" then you're going to want the Brophy Stake Pocket Tie Down Anchor item # TL2B you were looking at. The dimensions are 8-1/4" tall x 3-1/2" wide x 1-1/2" deep.
This tie down anchor will go through your stake pocket and will be secured by a pin that goes through the bottom. Each tie down anchor has a 4,000 lbs capacity. The Brophy Stake Pocket Tie Down Anchor item # TL2B is made in the USA and weighs 5 lbs. I have linked a review video below for you to take a look at and see this anchor in action.
If you're interested in a tie down that is closer in height to your stake pocket, then I recommend the Stake Pocket Tie-Down Anchor item # T55B it has a lower capacity though and I don't think it would be useful unless you're hauling lighter vehicles. The dimensions are 5-1/4" tall from the bottom of the mounting plate to the bottom of the anchor, 3-1/2" Wide, and 1-1/2" deep.
Products Referenced in This Question
Stake Pocket Tie-Down Anchor - Black Powder Coat - 2" D-Ring - 1,600 lbs
- Tie Down Anchors
- Trailer Tie-Down Anchors
- Truck Tie-Down Anchors
- Stake Pockets
- 5000 lbs
- Stake Pocket Anchor
- Brophy
more information >
Product Page this Question was Asked From
Brophy Stake Pocket Tie Down Anchor - Black Powder Coat - 3" D-Ring - 4,000 lbs
- Tie Down Anchors
- Trailer Tie-Down Anchors
- Truck Tie-Down Anchors
- Stake Pockets
- 4000 lbs
- Stake Pocket Anchor
- Brophy
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: tie down anchors
- Shop: Stake Pocket Tie-Down Anchor - Black Powder Coat - 2" D-Ring - 1,600 lbs
- Shop: Brophy Stake Pocket Tie Down Anchor - Black Powder Coat - 3" D-Ring - 4,000 lbs
- Shop: Stake Pocket Tie-Down Anchors - Black Powder Coat - 2-3/4" D-Ring - 4,000 lbs - Qty 2
- Shop: Buyers Products 5/8" Forged D-Ring With 4-Hole Integral Mounting Bracket
- Shop: Brophy Stake Pocket Tie Down Anchor - Black Powder Coat - 2-5/16" D-Ring - 4,000 lbs
- Shop: Stake Pocket Tie-Down Anchor - Black Powder Coat - 1-3/8" D-Ring - 1,600 lbs
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Video: Brophy Stake Pocket Tie Down Anchor Review
- Article: Determining Trailer Tongue Weight
- Q&A: How to Determine if T55B Stake Pocket Tie-Down Anchor will Fit Bri-Mar T712-6 Flatbed Tilt Trailer
- Shop: etrailer Trailer Coupler Latch Lock - 7/8" Span - 1/4" Diameter - Chrome - Keyed Alike
- Search Results: stake pocket tie down
- Q&A: Using Chains/Ratchet Binders with Brophy Stake Pocket Tie Downs # TL1B
- Q&A: Recommended Keyed Alike Coupler Latch Lock
- Q&A: Brophy Stake Pocket Tie Down Anchor # TL2B Dimension
- Q&A: Will Brophy Stake Pocket Tie Down Anchor TL2B Work With 6" Deep Stake Pocket?
- Video: Review of Brophy Tie Down Anchors - Trailer Tie-Down Anchors,Truck Tie-Down Anchors - TL2B
- Video: Packem Tie Down Anchors - Trailer Tie-Down Anchors - PK-SPTD Review
- Video: Review of Brophy Tie Down Anchors - Trailer Tie-Down Anchors - Truck Tie-Down Anchors - TL1B
- Video: etrailer.com Trailer Coupler Lock Review
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Top Weight Distribution Hitches for a Buttery Smooth Ride
- Search Results: hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Hitch
- Article: How to Measure for Trailer Hitch Drop
- Video: Choosing the Right Trailer Wiring
- Video: Choosing the Right Brake Controller
- Shop: Trailer Wiring
on Tie Down Anchors
