Which Kwikee Upgrade Kit Fits Kwikee 28 Series with Linkage B

Question

Question:

i have a 1996 mh, it has a lipperts system on the stepsstep. it a model 28 with a Binch on one of the linkage part.On the gear box, there is 151320-1 I would like clarification, you show a upgrade of lC379769. Lippert also has one that is 781006. I need clarification as to the difference if any. both are made my lippert. Thanks for your time

asked by: Gordon E

0

Expert Reply:

Since you have the linkage B setup the correct kit is the # 781006 which is our part number KW34FR.

expert reply by: Jameson C

0

Answer 1

Thank you for the information and photos! I reached out to my contact at Lippert with this info and they said that your Kwikee steps are old enough that you'll need a whole upgrade kit which is going to be part #KW34FR on our site. This kit…

view full answer...

Answer 2

The correct replacement control module for your Kwikee Steps with Control Module 909513 is the Lippert Components Kwikee Control Unit part #LC379606.

view full answer...

Answer 3

Since you have a Kwikee Series 28 step on your motorhome the correct motor upgrade kit is the part #LC379769 that you referenced.

view full answer...

Answer 4

You can use the Kwikee step as a replacement for your other brand of step. The 4 wires will be the same, the connector may be different but you can splice in the new connector. Because you are switching style and brand you will actually want to use…

view full answer...

Answer 5

We have just the step frame of the #LC3747452 that you referenced available with just the part number #LC3747457 which would replace just the components you are needing.

view full answer...

Answer 6

To avoid having to replace the entire setup you can use the Motor Upgrade Kit for Kwikee Electric RV Steps #KW34FR. This kit comes with a motor, control unit, gear, door sensor, and installation hardware to upgrade your steps to a like-new condition.…

view full answer...

Answer 7

Yes, you are correct that the 151320 gear box for your Kwikee Steps is no longer available and the solution is to replace the entire steps. Since you have a single step you do most likely have the Kwikee Series 28 step so you'd want the part…

view full answer...

Answer 8

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 9

The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…

view full answer...

Answer 10

In order to install a brake controller on a dump truck you'd first need to start with a 4-way trailer connector and then adapt this to a 7-way so you can hook up a brake controller. I won't have much info for anyone particular dump truck but…

view full answer...

Answer 11

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 12

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Which Kwikee Upgrade Kit Fits Kwikee 28 Series with Linkage B

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching