Replacement Lock Nuts For Tire Pressure Monitoring Sensors To Prevent Removal
Question:
Hi, I have a TPMS system that requires a nut to act as a locking mechanism on the valve stem per wheel so the sensor will not be removed without a tool to do so. One of the locking nutsinch has been stripped. I need to replace that locking nutinch and found the following description for the size I require: The two common sizes are . 453 and . 625 inch which the part # AM20906 is a confirmed fit for both. Are you and your team able to confirm this and provide direction as to where I may be able to find this part? Any help is greatly appreciated. Regards
asked by: Sherard S
Expert Reply:
For your TPMS sensors which thread onto the valve stem, they are going to require nuts with a size 7.7mm and 32 threads per inch. This is the standard thread size used on all valve stems. We have these in the Replacement Kit # TST74FR which is designed for the TST TPMS Tire Sensors. While these may not be the exact manufacturer you have the nuts are the standard size for the valve stems and will work with other kits.
The Americana Metal, Bolt-In Valve Stem # AM20906 you found refers to the 0.453" and 0.625" being the size of the hole in the wheel the stem bolts into.
Products Referenced in This Question
Replacement Flow Through ST3 O-Ring and Hardware Kit for TST TPMS Tire Sensors
- Accessories and Parts
- TPMS Sensor
- Tire Pressure Monitor Parts
- O-Ring
- TST
more information >
Product Page this Question was Asked From
Americana Metal, Bolt-In Valve Stem - 1-1/4" Long
- Tire Repair Tools
- Valve Stems
- Bolt-In Stem
- 10 Inch Tire
- 12 Inch Tire
- 13 Inch Tire
- 14 Inch Tire
- 15 Inch Tire
- 16 Inch Tire
- 17.5 Inch
- Chrome
- 200 psi
- Silver
- Americana
more information >
Continue Researching
- Video: Review of Hughes Autoformers Replacement Surge Module Power Watchdog Surge Protector - HU58FR
- Video: Review of Diode Dynamics Off Road Lights - SS5 Pro LED Combo Pod Light - DDY26GV
- Video: Review of Hughes Autoformers RV Surge Protectors - Hardwired Surge Protector - HU27FR
- Q&A: Replacement Surge Module for Power Watchdog Surge Protector with Bluetooth and Emergency Shut Down
- Video: Hughes Autoformers Replacement Surge Module Review
- Shop: Power Watchdog Surge Protector with Bluetooth and Emergency Shut Down - Hardwired - 50 Amp
- Video: TireMinder TPMS Replacement CR1632 Batteries Review
- Shop: Replacement Flow Through ST3 O-Ring and Hardware Kit for TST TPMS Tire Sensors
- Shop: Mighty Cord RV Power Cord - 50 Amp - 36'
- Shop: Hughes Autoformers Ground Neutral Bonded Plug for Generators
- Shop: Replacement CR1632 Batteries for TireMinder TPMS - Qty 6
- Shop: Mighty Cord Hardwire RV Power Cord w/ Pull Handle - 50 Amp - 25'
- Shop: TST TPMS for RVs - Color Display - Signal Booster - 6 Flow Through Tire Sensors
- Q&A: Troubleshooting E9 Code After Replacing Surge Module on Power Watchdog Surge Protector
- Q&A: Replacing Damaged or Lost Sensor on TST TPMS TST-507-FT-6-C
- Q&A: Flow Thru Sensors for TST TPMS and Replacement O-Rings and Hex Nuts
- Video: Review of TST TPMS Sensor - Replacement Flow Thru Hardware Kit - TST74FR
- Video: Hughes Autoformers Generator Ground Neutral Bonded Plug Review
- Q&A: What Orientation Does The Power Watchdog Surge Protector Need To Be Mounted In?
- Q&A: Can Power Watchdog Surge Protector Be Installed After Transfer Switch
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Q&A: Best 5th Wheel Hitch for 2018 Ram 2500 with Factory Puck System
- Search Results: 25580
- Shop: Trailer Wiring
- Search Results: 10~36
- Article: How to Measure for Trailer Hitch Drop
- Search Results: 10~51
- Shop: Suspension Enhancement
- Article: Most Popular Wheel Bearings
on Tire Repair Tools
