Recommended 5th Wheel Rail Kit for a 2015 Chevrolet Silverado 2500

Question

Question:

Recommended rails for 2015 chevy Silverado 2500 for a sliding patriot 5th wheel hitch. No puck or goose neck on truck.

asked by: Wanda K

0

Expert Reply:

For your 2015 Chevrolet Silverado 2500 I recommend going with the Curt Custom Fifth Wheel Installation Kit for Chevy/GMC # C16411-204.

This is a custom fit ISR kit that'll work great with your truck and also provide a mounting point for the B&W Patriot 5th Wheel Trailer Hitch w/ Slider # BWRVK3270.

expert reply by: Bryce D

0

Answer 1

There is no functional difference between the Curt Custom Fifth Wheel Installation Kit for Chevy/GMC #C16411-204 and the B&W Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches #BWRVK2506 they both will work just fine with the…

view full answer...

Answer 2

In order to install the B&W Custom Installation Kit part #BWRVK2506 which is a fit for your 2015 Chevrolet Silverado 2500 you will need to trim the plastic bed liner where the horizontal rails sit. This will be the case for all above bed base…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Yes, the TrackTowers part #Y52AV does fit into Yakima HD tracks like what you have installed on your trailer.

view full answer...

Answer 6

Hey Clint, you are going to be installing the rail kit on the truck as well, correct? The Demco Recon 5th Wheel Trailer Hitch #DM47YV by itself should take only about 30 mins to assemble and install. The Installation Rail Kit #DM8551000 will also…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...

Answer 9

The closest thing you'll find to an aftermarket puck system for your 2024 GMC Sierra 3500 is the B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1020 which gives you the gooseneck system but also doubles as the anchor point for…

view full answer...

Answer 10

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

view full answer...

Answer 11

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 12

Though the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs #F2709 will offer you more support when fully loaded, they will also affect your ride a lot more when not loaded. Even at the lowest setting (5 psi). I really only recommend…

view full answer...