Which Rhino Rack Roof Rack for Camper Shells for Snugtop Rebel

Question

Question:

I have a 2015 DCSB Tacoma with a Snugtop Rebel camper, S/N L87221, and am looking to install a Y02-480B rack system on it. Before I drill holes in the roof, can you verify that the 1-3/8inch track bolts in the Y02-480B package are correct, rather than the 2inch bolts on the Y02-480B-ST? For a little more info, the shell was made in 2019 and has a carpeted headliner. I purchased it used, and dont know whether or not it has the Sportsman Package, although I dont think it does.

asked by: Dan

0

Expert Reply:

The standard roof thickness of the Snugtop Rebel is 1/2 inch so the standard bolt length Rhino Rack Camper Shell Roof Rack part # Y02-480B would be correct kit to go with as it has the 1-3/8 inch long bolts.

expert reply by: Jameson C

0

Answer 1

The Rhino-Rack Aero Bar Roof Rack for Camper Shells part #Y02-480B is a great option for fiberglass truck bed campers as it was made for this exact purpose. It can support up to 220 lbs but bear in mind this rating is tested independently of the…

view full answer...

Answer 2

Thank you for the photo; and while it is very likely, I don't have the exact dimensions of the Leer Hi/Lo camper shell on your 2004 Chevy Silverado with an 8 foot bed in order to say with certainty if you can use the Rhino-Rack roof rack you…

view full answer...

Answer 3

Rhino-Rack #Y02-480B works for a camper shell on your 2021 Toyota Tacoma. This rack mounts directly to your cap. We don't have any roof rack or ladder rack options that fit around a camper shell.

view full answer...

Answer 4

You can either cut down the 63" long tracks that come with the Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-480B to fit your 2008 Toyota Tacoma OR you can purchase the 47-1/4" long Rhino-Rack Tracks #RTC12JW and get the 54"…

view full answer...

Answer 5

The reinforced section of the camper shell you have is a structural portion of it so I would not recommend going through it and instead would go to the outsides of it when you install the Rhino Rack Aero Bar Camper Shell Rack #Y02-480B.

view full answer...

Answer 6

Since your factory roof tracks are removed, you will need a complete roof rack kit that includes the roof tracks. I think your best option is to go with Rhino-Rack Aero Bar Roof Rack #Y02-480B.. This kit includes 63" long tracks that will be…

view full answer...

Answer 7

I'll start out by saying that the Rhino Rack roof mounted tracks like the ones included in the #Y02-480B come with caps that go on the ends of the tracks that can be removed and replaced if needed and allow you to cut the track to whatever length…

view full answer...

Answer 8

Everything is indeed included with the Rhino-Rack system with tracks so you can mount it on your hard tonneau cover: - Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount #Y02-480B The one thing I do highly recommend is to contact the…

view full answer...

Answer 9

The easiest and most cost efficient way to add a roof rack to the Leer camper shell you have on your truck would be the Rhino-Rack #Y02-480B. This comes with a track system as well as the crossbars and feet needed.

view full answer...

Answer 10

The distance from the bottom of the crossbar of the Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-480B to the track it mounts in measures 3 inches.

view full answer...

Answer 11

The Rhino Rack Aero Bar roof rack for camper shells part #Y02-480B that you referenced is the correct kit to use to add an aero bar roof rack for the camper shell of your truck. The rails will bolt to the top of the camper shell and then the feet and…

view full answer...

Answer 12

The difference between the Rhino-Rack Roof Rack System #Y02-490B and #Y02-490B-ST is that the #Y02-490B-ST is designed to be mounted on thicker truck caps and roofs and comes with 2" long mounting bolts; for reference the #Y02-490B comes with…

view full answer...