Recommended 4 on 4 Idler Hub for a 1 Inch Diameter Spindle
Question:
Looking for trailer hub for 4.80-8 4 bolt tire on a 1shaft, small Trailex aluminum trailer needs both wheels replaced. I have tires, rims, and shafts, need all other parts. Thanks
asked by: Rich P
Expert Reply:
For a 4 on 4 hub that fits a 1" diameter spindle, I recommend the Easy Grease Trailer Idler Hub Assembly for 2K Axles item # AKIHUB-440-2-G-EZ-1K. This kit works with both inner and outer bearing item # L44643. You will need one per axle. Each kit includes bearings, grease seal, grease cap, and four lug nuts.
I have linked an installation video below.
I recommend using LubriMatic LMX Industrial Strength Grease item # L11390 to repack your bearings. You will want to grab one tube per axle.
Products Referenced in This Question
LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Lubricants Sealants Adhesives
- Grease
- Brake and Bearing Grease
- Standard Lithium Grease
- Lithium Complex
- 14 oz
- LubriMatic
more information >
Replacement Trailer Hub Bearing - L44643
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.000 Inch I.D.
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Galvanized
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Continue Researching
- Video: Performance Tool Plastic Bearing Packer Review
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Shop: Bearing Packer - Plastic
- Shop: Kenda 4.80/4.00-8 Bias Trailer Tire with 8" Galvanized Wheel - 4 on 4 - Load Range B
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased - Threaded
- Shop: BT8 Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Shop: Cotter Pin - 1/8" Thick x 1-3/4" Long
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-440-2-G-1K Review
- Search Results: bearing grease
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Galvanized
- Search Results: bearing l44643
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: Most Popular Wheel Bearings
- Video: Redline Trailer Spindles 165931 Review
- Article: Trailer Wiring Diagrams
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: etrailer Trailer Idler Hub Assembly Review and Installation
- Q&A: Can Bearings for a 1-1/16 Inch Spindle Replace Bearings for a 1 Inch Spindle Using Same Hub
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Shop: Trailer Wiring
- Search Results: bearing buddy
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Search Results: l44649
- Article: Trailer Tire Sizing
- Shop: Trailer Hitch
- Shop: Brake Controller
- Search Results: 25580
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: etrailer Electric Trailer Brake Kit Installation
- Search Results: grease