Universal Anti-Rattle Hitch for a 1-1/4" Trailer Hitch

Question

Question:

Does this anti raddle device fit KAC bike rack with 1.25 hitch?

asked by: Tom

0

Expert Reply:

The Replacement Hitch Tite Anti-Rattle Hitch Pin for Saris Bike Racks with 1-1/4" Shanks # SA3015 is actually designed to only work with the Saris Bike Porter, Freedom, Axis Steel, Axis Aluminum, Cycle-On, T-Rax, Glide EX 4, and T-RAX Sport racks.

Instead, since we don't carry KAC bike racks or their products, you'd need a universal option like the Trailer Hitch Anti-Rattle Kit for 1-1/4" Trailer Hitches # F-315.

expert reply by: Bryce D

0

Answer 1

There is not a separate installation video for the Replacement Hitch Tite Anti-Rattle Hitch Pin for Saris Bike Racks with 1-1/4" Shanks #SA3015. However, I did check with Saris, and you will want to insert the pin on the left side of the hitch…

view full answer...

Answer 2

The 1-1/4 inch Saris hitch pin that is equivalent to part #SA3021 is the Replacement Hitch Tite Anti-Rattle Hitch Pin #SA3015.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 6

The Draw-Tite Front Mount Trailer Hitch Receiver #65076 will fit your 2023 Ford F-350 dually. It features a bolt-on installation and has a 2" receiver. The hitch has a 9,000 lb line pull, 500 lb vertical load, and 5,000 lb gross trailer weight.…

view full answer...

Answer 7

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

view full answer...

Answer 8

The extra hole on the side of the Replacement Aluminum Hitch Adapter Sleeve for Saris 1-1/4" Hitch Bike Racks #SA3032 that you referenced is use for attaching the adapter with the included nut and bolt to the shank of the bike rack. Basically…

view full answer...

Answer 9

For the Replacement Aluminum Hitch Adapter Sleeve for Saris 1-1/4" Hitch Bike Racks Item #SA3032: Length: 5-1/2 inches Hole diameter: 1/2 inch Space between the holes: 1-1/4 inches This adapter is specifically for Saris bike racks that fit both…

view full answer...

Answer 10

The #SA3032 adapter sleeve is not threaded, but the shank of the Saris bike rack (I'm assuming you mean Saris, not Solaris) is threaded. The anti-rattle hitch lock for a Saris bike rack is part #SA3022.

view full answer...

Answer 11

The size of the small bolt in the Saris the adapter part #SA3032 is M10 by 60. The nut is M10.

view full answer...

Answer 12

Good news! I was able to go out to the warehouse and measure the pin that is included in the Replacement Hitch Bolt kit #Y8780022 and found that when placed in the lock you will have 3.66 inches of pin length between the lock and the head of the…

view full answer...

Universal Anti-Rattle Hitch for a 1-1/4" Trailer Hitch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching