5TH Wheel Bed Rails and In Bed Wiring For a 2017 GMC Sierra 2500HD

Question

Question:

I’m looking to install a set of 5th wheel bed rails in my truck 2017 gmc sierra 2500hd I don’t think I have the prep package as I don’t have holes in my bed. The frame is threaded on each side for the rail adapters is there a specific kit I need? Thanks

asked by: Lars

0

Expert Reply:

If you are looking for the industry standard rails the Curt # C16411-204 includes the above bed rails and below bed mounting brackets. If you prefer a system closer to the factory install for a cleaner bed the Reese # RP30158-68 provides you with the 4 outer puck holes for using a 5th wheel hitch as well as the center gooseneck hole. The 4 outer holes are the same dimensions as that used on the Ford Puck system so you can use either the Fixed # BWRVK3300 or Slider # BWRVK3370 5th wheel hitches.

The Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness # 41157 will give you a 7-way connector inside your bed so you will not have to stretch the trailer connector across your tailgate and down to bumper connector.

expert reply by: Bud M

0

Answer 1

The Elite Series Under-Bed Gooseneck Complete Hitch #RP30158-68 is the only way to get a puck system in the bed of your 2016 GMC Sierra 2500 but will come with a gooseneck ball center. This means you would have to use a 5th wheel hitch that has feet…

view full answer...

Answer 2

Yes, there is an option to add an aftermarket under bed puck system to your 2018 Chevy Silverado 2500. It is the Elite Series Under-Bed Gooseneck Complete Hitch item #RP30158-68. This under bed system has a towing capacity of 25,000 lbs. I have…

view full answer...

Answer 3

The TorkLift StableLoad Suspension Upgrade for Upper Overload Springs, #TLA7202 are the fit for your 2016 GMC Sierra 3500. They will assist in reducing side to side sway as well as porpoising, and they will reduce body roll. They will reduce the…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 7

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

view full answer...

Answer 8

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be the industry…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The factory prep package or pucks are not the same between Ram, GM and Ford. The spacing is all different which means you cannot use a 5th wheel hitch for Ram pucks on a GM with pucks. Take the Curt A25 5th Wheel Trailer Hitch for example which is…

view full answer...

Answer 12

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth mentioning…

view full answer...